DiodesZetex Hall Effect Sensor 4 mA 60 mA Latching Solder Terminal Open Drain Maintained, 105 °C, -40 °C, 28V dc, 3.8 V
- RS 제품 번호:
- 246-7397
- 제조사 부품 번호:
- AH3764Q-SA-7
- 제조업체:
- DiodesZetex
본 이미지는 참조용이오니 재확인이 필요하시면 문의해주세요.
현재 비가용
RS는 이 제품을 더 이상 판매하지 않습니다.
- RS 제품 번호:
- 246-7397
- 제조사 부품 번호:
- AH3764Q-SA-7
- 제조업체:
- DiodesZetex
참조 문서
제정법과 컴플라이언스
제품 세부 사항
The DiodesZetex makes a high-voltage, high-sensitivity Hall-effect latch IC designed for brushless DC-motor commutation, speed measurement, angular or linear encoders and position sensors in automotive applications. To support a wide range of demanding applications, the design is optimized to operate over the supply range of 3.0V to 28V. For robustness and protection, the device has a reverse blocking diode with a Zener clamp on the supply. The output has an over current limit and a Zener clamp. It has operating temperature range of -40°C to +150°C.
Operating voltage range of 3.0 V to 28 V Bipolar latch operation were south pole is on and north pole is off High sensitivity Bop and Brp of +40G and -40G typical single open-drain output with overcurrent limit Package type is SOT23
관련된 링크들
- DiodesZetex Hall Effect Sensor 4 mA 60 mA Latching Solder Terminal Open Drain Maintained, 105 °C, -40 °C, 28 V dc, 3.8 V
- DiodesZetex Hall Effect Sensor 4 mA 60 mA Latching Solder Terminal Open Drain Maintained, 105 °C, -40 °C, 28 V dc, 3 V
- DiodesZetex Hall Effect Sensor 4 mA 55 mA Latching Solder Terminal Open Drain Maintained, 105 °C, -40 °C, 28 V dc, 3 V
- DiodesZetex Hall Effect Sensor 5.8 mA 60 mA Latching Solder Terminal Open Drain Maintained, 105 °C, -40 °C, 28 V dc, 3 V
- DiodesZetex Hall Effect Sensor 4 mA 60 mA Omnipolar Solder Terminal Open Drain Maintained, 105 °C, -40 °C, 28 V dc, 3 V
- DiodesZetex Hall Effect Sensor 4 mA Omnipolar Solder Terminal Open Drain Maintained, 105 °C, -40 °C, 28 V dc, 3 V dc
- Infineon Hall Effect Sensor 1.6 mA 25 mA Bipolar Hall Latch Solder Pin Open Drain Latching, 107 °C, -40 °C, 32 V, 3 V
- DiodesZetex Hall Effect Sensor 6 mA Latching Surface Mount Direct Latching, 150 °C, -40 °C, 27 V, 2.7 V