- RS 제품 번호:
- 418-495
- 제조사 부품 번호:
- 32NNSF
- 제조업체:
- Eaton
260 개 홍콩에 재고-결제 확인후 2-3영업일내 국내 도착
3205 <재고있음> 5-9영업일내 홍콩 발송
추가완료!
단가 개당
₩18,970.45
수량 | 한팩당 |
1 - 4 | ₩18,970.45 |
5 - 24 | ₩18,573.723 |
25 - 49 | ₩18,004.506 |
50 - 249 | ₩17,564.657 |
250 + | ₩14,456.387 |
- RS 제품 번호:
- 418-495
- 제조사 부품 번호:
- 32NNSF
- 제조업체:
- Eaton
제정법과 컴플라이언스
해당 안됨
- COO (Country of Origin):
- IN
제품 세부 사항
Cooper Bussmann HRC Fuse Holders - SAFEloc Series
Cooper Bussmann SAFEloc fuse holders provide a positive, stress free fuse fitting, locking the fuse into position to ensure safe insertion and withdrawal from the base. The base contacts themselves are fully shrouded, helping protect against electric shock. The shrouds utilise simple slide/snap action allowing access to the contact terminal screws. Cooper Bussmann SAFEloc fuse holders are ideal for protecting a wide range of electrical equipment such as lighting, heating, motor and control equipment circuits.
Features and Benefits
Carrier slide action enables ease of attachment to fuselink
Fuselink locked into position for safe insertion and withdrawal
Low power loss and increased reliability due to contact connection type
Fully shrouded base contacts
Either surface or 35mm rail mounting
Front connection access, 16mm2 max cable size
Fuselink locked into position for safe insertion and withdrawal
Low power loss and increased reliability due to contact connection type
Fully shrouded base contacts
Either surface or 35mm rail mounting
Front connection access, 16mm2 max cable size
Eaton SAFEloc Dual-Mounting Holder, F1 Fuse Size, 32A 32NNSF
This Eaton rail mount fuse holder from the SAFEloc range is designed for offset tag fuses. It protects your fuse and lets you access it easily when you need to replace it. A seamless slide design means you can fit the fuse simply without the need for carrier contacts. This direct contact also means lower current loss and better performance. You can mount this fuse holder on your preferred surface via a standard DIN rail or a single-screw panel mount.
Automatic lock mechanism keeps fuse fixed in the holder and prevents loosening through vibration
Thermoplastic polyester base is highly resistant to chemical damage
Front connection for quick and easy access in the event of emergencies
Includes indicator to signal when the fuse needs replacing
Thermoplastic polyester base is highly resistant to chemical damage
Front connection for quick and easy access in the event of emergencies
Includes indicator to signal when the fuse needs replacing
How do I mount this Eaton fuse holder using a DIN rail?
Simply clip the bottom of the fuse holder to a compatible DIN rail that measures 35mm in size and then install it in your circuit. This will make it easier to access in environments where space is limited.
Note
Eaton formerly known as Bussmann
사양
속성 | 값 |
---|---|
Fuse Holder Type | Rail Mount |
Range | SAFEloc |
Fuse Size | F1 |
Current Rating | 32A |
Voltage Rating | 550V ac |
Number of Poles | 1P |
Includes Indicator | Yes |
Rail Type | DIN 35 mm |
Compatible Fuse Sizes | F1 |
Gauge Piece Colour | Black |
Series | Bussmann |
Terminal Type | Front Connected |