Sensata / Cynergy3 RSF50 Series Vertical Nitrile Rubber (NBR) Float Switch, 1 m Cable, NO/NC, 240 V ac Max, 120 V dc Max

모든 Float Switches 열람하기
대량 구매 할인 기용 가능

Subtotal (1 unit)*

₩42,619.60

Add to Basket
수량 선택 또는 입력
재고있음
  • 10 개 단위 배송 준비 완료
더 자세한 내용이 필요하신가요? 필요한 수량을 입력하고 '배송일 확인'을 클릭하면 더 많은 재고 및 배송 세부정보를 확인하실 수 있습니다.
수량
한팩당
1 - 5₩42,619.60
6 - 11₩40,908.80
12 +₩39,216.80

* 참고 가격: 실제 구매가격과 다를 수 있습니다

RS 제품 번호:
756-4270
제조사 부품 번호:
RSF54Y100J1/8
제조업체:
Sensata / Cynergy3
제품 정보를 선택해 유사 제품을 찾기
모두 선택

브랜드

Sensata / Cynergy3

Product Type

Float Switch

Mount Type

Vertical

Switch Output

NO/NC

Housing Material

Polypropylene

Cable Length

1m

Minimum Operating Temperature

-20°C

Maximum Operating Temperature

100°C

Maximum AC Voltage

240V

Maximum DC Voltage

120V

Maximum Current

600mA

Gasket Material

Nitrile Rubber (NBR)

Standards/Approvals

WRAS and NSF

Hazardous Area Certification

No

Series

RSF50

COO (Country of Origin):
CN

Cynergy3 RSF50 Series Float Switches


Cynergy3 RSF50 float switches are compact devices suitable for vending machines printing system and chemical dosing equipment, for example. RSF50 float switches are vertically mounted and feature a single switch.

There is a range of different material options available within the RSF50 series so you will be sure to find a suitable float switch for more commonly used liquids.

The direction of the switch can be reversed by firstly removing the float, inverting the switch and re-fitting it to the stem.

Within the series there are 5 ranges:

RSF53 (black) - Nylon

RSF54 (opaque) - Polypropylene (WRAS approved)

RSF56 (grey) - Polyphenylene Sulphide (PPS)

RSF57 (green) - Polyvinylidene Fluoride (PVDF)

RSF58 (white) - Polypropylene (UL approved)

Note - the different ranges feature other differences. Please refer to the Datasheet for more information on technical specifications.

What contact types are there?

The RSF50 float switches can be configured for N/O (Normally Open) or N/C (Normally Closed) operation.

What mounting thread does it have?

RSF50 float switches have either M12 or 1/8” NPT mounting thread. This is depicted by the last part of the part number. If it ends in “B” or “C”, it is an M12. If it ends in “1/8” it is 1/8” NPT.

Note

Part numbers ending in '1/8' have a 1/8"NPT mounting thread
Part numbers ending in 'C' have an M12 mounting thread

Warning

The cable entry point must NOT under any circumstances be submerged.
On the Horizontal switches they must be fitted through the wall of a tank so that the cable is on the outside.
On the Vertical type the mounting thread and cable entry must be above the highest level of the liquid.

Supplied with

epoxy sealed leadouts

관련된 링크들