- RS 제품 번호:
- 181-8392P
- 제조사 부품 번호:
- S25FL128SAGNFV000
- 제조업체:
- Infineon
477 <재고있음> 5-9영업일내 홍콩 발송
추가완료!
단가 개당(트레이에 담겨 공급됨)
₩5,828.437
수량 | 한팩당 |
84 - 165 | ₩5,828.437 |
168 + | ₩5,702.519 |
- RS 제품 번호:
- 181-8392P
- 제조사 부품 번호:
- S25FL128SAGNFV000
- 제조업체:
- Infineon
제정법과 컴플라이언스
제품 세부 사항
This family of devices connect to a host system via a SPI. Traditional SPI single bit serial input and output (Single I/O or SIO) is
supported as well as optional two bit (Dual I/O or DIO) and four bit (Quad I/O or QIO) serial commands. This multiple width interface
is called SPI Multi-I/O or MIO. In addition, the FL-S family adds support for DDR read commands for SIO, DIO, and QIO that transfer
address and read data on both edges of the clock.
The Eclipse architecture features a Page Programming Buffer that allows up to 128 words (256 bytes) or 256 words (512 bytes) to be
programmed in one operation, resulting in faster effective programming and erase than prior generation SPI program or erase
algorithms.
Executing code directly from flash memory is often called Execute-In-Place or XIP. By using FL-S devices at the higher clock rates
supported, with QIO or DDR-QIO commands, the instruction read transfer rate can match or exceed traditional parallel interface,
asynchronous, NOR flash memories while reducing signal count dramatically.
The S25FL128S and S25FL256S products offer high densities coupled with the flexibility and fast performance required by a variety
of embedded applications. They are ideal for code shadowing, XIP, and data storage.
supported as well as optional two bit (Dual I/O or DIO) and four bit (Quad I/O or QIO) serial commands. This multiple width interface
is called SPI Multi-I/O or MIO. In addition, the FL-S family adds support for DDR read commands for SIO, DIO, and QIO that transfer
address and read data on both edges of the clock.
The Eclipse architecture features a Page Programming Buffer that allows up to 128 words (256 bytes) or 256 words (512 bytes) to be
programmed in one operation, resulting in faster effective programming and erase than prior generation SPI program or erase
algorithms.
Executing code directly from flash memory is often called Execute-In-Place or XIP. By using FL-S devices at the higher clock rates
supported, with QIO or DDR-QIO commands, the instruction read transfer rate can match or exceed traditional parallel interface,
asynchronous, NOR flash memories while reducing signal count dramatically.
The S25FL128S and S25FL256S products offer high densities coupled with the flexibility and fast performance required by a variety
of embedded applications. They are ideal for code shadowing, XIP, and data storage.
For products that are Customized and under Non-cancellable & Non-returnable, Sales & Conditions apply.
사양
속성 | 값 |
---|---|
Memory Size | 128Mbit |
Interface Type | CFI, SPI |
Package Type | WSON |
Pin Count | 8 |
Organisation | 16M x 8 bit |
Mounting Type | Surface Mount |
Cell Type | NOR |
Minimum Operating Supply Voltage | 1.65 (I/O) V, 2.7 (Core) V |
Maximum Operating Supply Voltage | 3.6 (Core) V, 3.6 (I/O) V |
Block Organisation | Symmetrical |
Length | 6mm |
Height | 0.75mm |
Width | 8mm |
Dimensions | 8 x 6 x 0.75mm |
Series | S25FL |
Number of Words | 16M |
Minimum Operating Temperature | -40 °C |
Maximum Random Access Time | 14.5ns |
Number of Banks | 2 |
Maximum Operating Temperature | +105 °C |
Automotive Standard | AEC-Q100 |
Number of Bits per Word | 8bit |