STEGO FPI/FPO 018 Series Filter Fan, 230 V ac, AC Operation, 599m³/h Filtered, 1010m³/h Unimpeded, IP54, 291 x 291mm
- RS 제품 번호:
- 194-7672
- 제조사 부품 번호:
- 01884.0-01
- 제조업체:
- STEGO
일시 품절-다음 입고 날짜는 17/06/2024 (일/월/년) 이며, 그 후 5-10영업일내 홍콩에서 발송. 정확한 입고 수량에 대한 문의는 krenquiry@rs-components.com 로 연락주세요.
추가완료!
단가 개당
₩784,903.671
수량 | 한팩당 |
1 - 4 | ₩784,903.671 |
5 + | ₩706,412.096 |
- RS 제품 번호:
- 194-7672
- 제조사 부품 번호:
- 01884.0-01
- 제조업체:
- STEGO
참조 문서
제정법과 컴플라이언스
- COO (Country of Origin):
- DE
제품 세부 사항
The interior temperature of an enclosure can be reduced by channelling cooler filtered outside air into the enclosure thus expelling heated internal air. The resulting airflow prevents formation of localised hot pockets in installations and protects electronic components from overheating.
The Filter Fan Plus series uses a new air flap-outlet technology for the air outlet and thus reaches a high degree of airflow. A ratchet mechanism is used for mounting and provides high stability and tightness. Depending on the application there are two systems that are available - the FPI or FPO system. The FPI system is a standard installation with a filter fan in the lower part of the enclosure which ensures that fresh air is fed into the enclosure (airflow direction "In"). This system consists of a filter fan and exit filter. Whereas in the FPO system, the filter fan is located in the upper area of the enclosure to avoid heat buildups (airflow direction "Out"). The FPO system is composed of an intake filter and exit filter fan.
The Filter Fan Plus series uses a new air flap-outlet technology for the air outlet and thus reaches a high degree of airflow. A ratchet mechanism is used for mounting and provides high stability and tightness. Depending on the application there are two systems that are available - the FPI or FPO system. The FPI system is a standard installation with a filter fan in the lower part of the enclosure which ensures that fresh air is fed into the enclosure (airflow direction "In"). This system consists of a filter fan and exit filter. Whereas in the FPO system, the filter fan is located in the upper area of the enclosure to avoid heat buildups (airflow direction "Out"). The FPO system is composed of an intake filter and exit filter fan.
사양
속성 | 값 |
---|---|
Unimpeded Air Flow | 1010m³/h |
Noise Level | 70dB(A) |
Filtered Air Flow | 599m³/h |
Input Current | 700mA |
Input Power Rating | 140W |
AC or DC Operation | AC |
Face Dimensions | 291 x 291mm |
Installation Depth | 160mm |
Supply Voltage | 230 V ac |
Face Height | 291mm |
Face Width | 291mm |
IP Rating | IP54 |
Series | FPI/FPO 018 |
Special Features | Easy Mounting, New Air Flap Outlet Technology for High Airflow, One Filter Mat, Ratchet Mechanism is Used for Mounting and Provides High Stability and Tightness |
Bearing Type | Ball |
Termination Type | Clamp |