WIZnet Inc RTL8201CP-VD-LF, Ethernet Controller, 3 V 100 Mbps, 48-Pin 3.6 V LQFP
- RS 제품 번호:
- 419-952
- 제조사 부품 번호:
- RTL8201CP-VD-LF
- 제조업체:
- WIZnet Inc
본 이미지는 참조용이오니 재확인이 필요하시면 문의해주세요.
대량 구매 할인 기용 가능
Subtotal (1 pack of 2 units)*
₩7,858.40
현재 액세스할 수 없는 재고 정보 - 나중에 다시 확인해 주세요.
수량 | 한팩당 | 한팩당* |
|---|---|---|
| 2 - 64 | ₩3,929.20 | ₩7,858.40 |
| 66 - 128 | ₩3,844.60 | ₩7,689.20 |
| 130 + | ₩3,760.00 | ₩7,520.00 |
* 참고 가격: 실제 구매가격과 다를 수 있습니다
- RS 제품 번호:
- 419-952
- 제조사 부품 번호:
- RTL8201CP-VD-LF
- 제조업체:
- WIZnet Inc
사양
참조 문서
제정법과 컴플라이언스
제품 세부 사항
제품 정보를 선택해 유사 제품을 찾기
모두 선택 | 제품 정보 | 값 |
|---|---|---|
| 브랜드 | WIZnet Inc | |
| Maximum Data Rate | 100Mbps | |
| Product Type | Ethernet Controller | |
| Sub Type | Controller | |
| Communication Mode | Full Duplex/Half Duplex | |
| Loopback Mode | External, Internal | |
| Standard Supported | IEEE 802.3u | |
| Mount Type | Surface | |
| Package Type | LQFP | |
| Maximum Supply Voltage | 3.6V | |
| Pin Count | 48 | |
| Minimum Operating Temperature | 0°C | |
| Maximum Operating Temperature | 70°C | |
| Length | 9mm | |
| Height | 1.7mm | |
| Standards/Approvals | No | |
| Minimum Supply Voltage | 3V | |
| Width | 9 mm | |
| Supply Current | 10μA | |
| Automotive Standard | No | |
| 모두 선택 | ||
|---|---|---|
브랜드 WIZnet Inc | ||
Maximum Data Rate 100Mbps | ||
Product Type Ethernet Controller | ||
Sub Type Controller | ||
Communication Mode Full Duplex/Half Duplex | ||
Loopback Mode External, Internal | ||
Standard Supported IEEE 802.3u | ||
Mount Type Surface | ||
Package Type LQFP | ||
Maximum Supply Voltage 3.6V | ||
Pin Count 48 | ||
Minimum Operating Temperature 0°C | ||
Maximum Operating Temperature 70°C | ||
Length 9mm | ||
Height 1.7mm | ||
Standards/Approvals No | ||
Minimum Supply Voltage 3V | ||
Width 9 mm | ||
Supply Current 10μA | ||
Automotive Standard No | ||
Embedded Ethernet Controllers
WIZnet's range of Embedded Ethernet controller Chips, which inlcudes the following:
RTL8201CP-VD-LF is a single chip/single port PHYceiver with an MII (Media Independent interface)/SNI(Serial Network Interface) and implements all 10/100M Ethernet Physical-layer functions. A PECL interface is supported to connect with an external 100Base-FX fiber optic tranceiver
W3100A-LF is a fully hardwired TCP/IP stack supporting TCP, UDP, IP, ARP, ICMP, MAC internet protocols. Features include amazing protocol processing speed depending upon MCU); 8051 (max. 1Mbps), AVR (max.8 Mbps), ARM7 (max. 21Mbps)
W3150A+ is a fully hardwired TCP/IP stack with support for ADSL connection (with PPPoE) and TCP, UDP, IP, ARP, ICMP, IGMP, PPPoE, MAC protocols. Features include High Throughput speeds; 8051(max. 1Mbps), AVR (max. 8Mbps), ARM7 (max. 21Mbps) and 10/100 Base-T Ethernet (Auto detection) support
W5100 is a fully hardwired TCP/IP stack with support for TCP, UDP, ICMP, IPv4 ARP, IGMP, PPPoE protocols. Features include 10BaseT/100BaseTX Ethernet MAC/PHY embedded support and ADSL connection (with PPPoE Protocol with PAP/CHAP Authentication mode)
W5300 is designed for Internet embedded applications. The full hardware logic integrates 10/100 Ethernet controller, MAC, and TCP/IP with communication protocols such as TCP, UDP, IPv4, ICMP, IGMP, ARP and PPPoE. The data communication memory is extended to 128Kbyte and supports 16-bit bus interface.