- RS 제품 번호:
- 795-9965
- 제조사 부품 번호:
- 811-334-10
- 제조업체:
- Mitutoyo
1 <재고있음> 5-9영업일내 홍콩 발송
추가완료!
단가 개당
Was ₩2,429,485.427
귀하의 지불
₩1,694,441.716
수량 | 한팩당 |
1 + | ₩1,694,441.716 |
- RS 제품 번호:
- 795-9965
- 제조사 부품 번호:
- 811-334-10
- 제조업체:
- Mitutoyo
제정법과 컴플라이언스
- COO (Country of Origin):
- JP
제품 세부 사항
HARDMATIC Durometer
Professional analogue and digital durometers designed to test a range of different materials.
SR44 Battery.
Parallels, Surface Finish & Hardness
Surface Finish
Any machined component has a surface geometry which consists of three basic elements:
Form or Curvature - Whether the surface has irregular bumps or dimensional changes
Waviness - Whether the surface has regular repetitive ripples or patterns (e.g. milling patterns)
Roughness - The shapes or irregularities that are smaller than, and form part of the waviness pattern (e.g. material micro-structure)
Waviness - Whether the surface has regular repetitive ripples or patterns (e.g. milling patterns)
Roughness - The shapes or irregularities that are smaller than, and form part of the waviness pattern (e.g. material micro-structure)
Waviness and roughness are traditionally the most difficult elements to measure when comparing surface finish, however, they have a radical effect on the performance of the finished component. Variations will cause aesthetic appearance changes, component wear variations, oil retention variation etc. Many manufacturers therefore specify a range of roughness values which their components should be manufactured to, often expressed as: Ra, Rq (RMS), RzDIN, Ry, Sm,mm.
사양
속성 | 값 |
---|---|
Shore Scale | Shore D |
Tester Type | Durometer |
Indenter | Conical Point |
Graduation | 0.5 |
Weight | 320g |
Dimensions L x W x D | 195 x 60 x 30mm |