- RS 제품 번호:
- 864-6862
- 제조사 부품 번호:
- uLCD-43DT-AR
- 제조업체:
- 4D Systems
일시 품절-다음 입고 날짜는 07/06/2024 (일/월/년) 이며, 그 후 5-10영업일내 홍콩에서 발송. 정확한 입고 수량에 대한 문의는 krenquiry@rs-components.com 로 연락주세요.
추가완료!
단가 개당
₩219,992.021
수량 | 한팩당 |
1 - 4 | ₩219,992.021 |
5 - 9 | ₩217,879.019 |
10 + | ₩216,559.47 |
- RS 제품 번호:
- 864-6862
- 제조사 부품 번호:
- uLCD-43DT-AR
- 제조업체:
- 4D Systems
참조 문서
제정법과 컴플라이언스
제품 세부 사항
4D Systems Resistive Touch LCD Modules with DIABLO16 Processor for Use with Arduino
The range of resistive touch LCD modules for Arduino available from 4D Systems provide everything needed by a user to easily interface between an Arduino (using its serial port + one GPIO pin) and the resistive touch LCD module, eliminating wiring headaches. The user can then quickly begin programming the 4D Systems display module through the Arduino. This display is a secondary display and does not replace the monitor or TV used to program the Arduino itself.
Powered from the Arduino the display module DIABLO16 processor can be programmed and configured using 4D Systems Workshop4 IDE software (see datasheet for download instruction). The resistive touch LCD module is set up to receive a wide range of serial commands from the Arduino, for example, to display shapes, text, images, to play sounds and log data to the microSD card.
Powered from the Arduino the display module DIABLO16 processor can be programmed and configured using 4D Systems Workshop4 IDE software (see datasheet for download instruction). The resistive touch LCD module is set up to receive a wide range of serial commands from the Arduino, for example, to display shapes, text, images, to play sounds and log data to the microSD card.
Features
DIABLO16 processor
Built-in extensive 4DGL graphics and system library functions
Flash memory for user code
Audio amplifier and loudspeaker
microSD card socket
16 x GPIO pins
I2C, SPI and UART communications
Powered from Arduino
Built-in extensive 4DGL graphics and system library functions
Flash memory for user code
Audio amplifier and loudspeaker
microSD card socket
16 x GPIO pins
I2C, SPI and UART communications
Powered from Arduino
Kit Contents
LCD Resistive Touch Module
4D Arduino adapter shield
Female to female 150mm 5-way jumper cable
Quick start user guide
4D Arduino adapter shield
Female to female 150mm 5-way jumper cable
Quick start user guide
Note
For products that are Customized and under Non-cancellable & Non-returnable, Sales & Conditions apply.
4D Systems LCD Touchscreens
사양
속성 | 값 |
---|---|
Diagonal Display Size | 4.3in |
Display Technology | Resistive Touch Screen |
Display Resolution | 480 x 272pixel |
Viewing Area Dimensions | 53.85 x 95.04mm |
Dimensions | 119.5 x 67.0 x 15.2mm |
For Use With | Arduino |
Series | gen4 |