STLD40D is a boost converter that operates from 3.0 V to 5.5 V. It can provide an output voltage as high as 37 V and can drive up to 10 white LEDs in series. The converter is a PFM (pulse frequency modulation) inductor switch that can work in discontinuous (DCM) mode operation. A minimum OFF time of the embedded boost switch TSWis fixed internally and allows limiting the switching frequency. The output current capability is 20 mA with an output voltage of 37 V. The regulation is done by sensing the LED current through the resistor RLED. The device can be turned ON/OFF through the logic enable signal pin EN. By applying a low frequency PWM signal the LEDs can be dimmed. The maximum peak inductor current can be programmed by connected a resistor RSETto the pin RSET.

Inductor switches boost controller
PFM mode control
High efficiency over wide range of input voltage from 3.0 V to 5.5 V
Over voltage protection with automatic restart
Adjustable peak current limit
Enable pin with possibility of PWM dimming control
Low shutdown current < 1 μA
Small external component
Good load and line regulation
QFN8 3 x 3 mm
Applications
White LED supply for LCD backlight
Mobile phone
PDA and organizers
Any handsets powered form 3.0 V to 5.5 V

수량	한팩당
750 - 1499	₩2,162.00
1500 +	₩2,105.60

모두 선택	제품 정보	값
	브랜드	STMicroelectronics
	Package Type	QFN
	Display Type	LED
	Number of Pins	8
	Supply Voltage	3 → 5.5 V
	Minimum Operating Temperature	-40°C
	Maximum Operating Temperature	+85°C
	Mounting Type	Surface Mount
	Width	3.15mm
	Height	0.95mm
	Length	3.15mm

	모두 선택
	브랜드 STMicroelectronics
	Package Type QFN
	Display Type LED
	Number of Pins 8
	Supply Voltage 3 → 5.5 V
	Minimum Operating Temperature -40°C
	Maximum Operating Temperature +85°C
	Mounting Type Surface Mount
	Width 3.15mm
	Height 0.95mm
	Length 3.15mm

STMicroelectronics STLD40DPUR QFN Display Driver, 8 Pin, 3 → 5.5 V

For these non-cancellable (NC), and non-returnable (NR) products, Terms and Conditions apply.