The MIC4830 is a low noise 180VPP electroluminescent (EL) lamp driver. Using advanced Bipolar, CMOS, DMOS (BCD) technology, the MIC4830 integrates a high voltage boost converter and an H-bridge driver for driving a large EL lamp. The MIC4830 can drive large panel displays for mobile phones, MP3 players, or automotive electronics where EL panels are used for backlighting. The MIC4830 offers design flexibility with adjustable lamp and boost converter frequencies, simply by applying external resistors.

1.8V to 5.5V input voltage
180VPP output voltage
Low audible noise EL drive waveform
Supports EL panel sizes up to 4in² (25cm²)
Low 45μA operating supply current
Small inductor size with low profile (220μH)
1.8V to 5.5V input voltage
180VPP output voltage
Low audible noise EL drive waveform
Supports EL panel sizes up to 4in² (25cm²)
Low 45μA operating supply current
Small inductor size with low profile (220μH)
Adjustable boost converter frequency
Adjustable EL lamp frequency

모두 선택	제품 정보	값
	브랜드	Microchip
	Package Type	MSOP
	Number of Pins	8
	Supply Voltage	7 V
	Maximum Supply Current	45µA
	Minimum Operating Temperature	-40°C
	Maximum Operating Temperature	+85°C
	Mounting Type	Surface Mount
	Width	3mm
	Height	0.92mm
	Length	3mm

	모두 선택
	브랜드 Microchip
	Package Type MSOP
	Number of Pins 8
	Supply Voltage 7 V
	Maximum Supply Current 45µA
	Minimum Operating Temperature -40°C
	Maximum Operating Temperature +85°C
	Mounting Type Surface Mount
	Width 3mm
	Height 0.92mm
	Length 3mm

Microchip MIC4830YMM MSOP Display Driver, 8 Pin, 7 V

For these non-cancellable (NC), and non-returnable (NR) products, Terms and Conditions apply.