- RS 제품 번호:
- 446-0793
- 제조사 부품 번호:
- 2303132
- 제조업체:
- Phoenix Contact
240 <재고있음> 5-9영업일내 홍콩 발송
45 <재고있음> 5-9영업일내 홍콩 발송
추가완료!
단가 개당가격(5개가 1팩안에)
₩5,923.307
수량 | 한팩당 | 한팩당* |
5 + | ₩5,923.307 | ₩29,616.533 |
*다른 단위에 대한 가격 표시 |
- RS 제품 번호:
- 446-0793
- 제조사 부품 번호:
- 2303132
- 제조업체:
- Phoenix Contact
제정법과 컴플라이언스
- COO (Country of Origin):
- PL
제품 세부 사항
Universal Terminals
Universal terminals moulded in polyamide to fit both 'G' and 'Top Hat' rail.
Screw conductor securing with closed screwdriver shafts. Available conductor acceptance sizes, 2.5mm² to 35mm². The range comprises of grey (phase), blue (neutral), and yellow/green (earth) terminals. A 10-way insertion (jumper) bridge is also available, as is a 35mm rail end bracket.
Screw conductor securing with closed screwdriver shafts. Available conductor acceptance sizes, 2.5mm² to 35mm². The range comprises of grey (phase), blue (neutral), and yellow/green (earth) terminals. A 10-way insertion (jumper) bridge is also available, as is a 35mm rail end bracket.
Individual terminals and complementary accessories
Approval Category II 2 GD EEx e II Cert. No. KEMA 98ATEX1651U
Phoenix Contact Jumper Bar For Terminal Block, 5.2mm Pitch, 10 Positions - EBL 10- 5 - 2303132
Connect devices on a terminal block to a power source with this jumper bar from Phoenix Contact. As it eliminates the need for running separate wires for each device, the installation process is streamlined to save you time and effort. Thanks to the bar's 10-position structure, you can connect several appliances to a single wire simultaneously. This unit is made from hard-wearing copper, which offers excellent electrical conductivity and resistance to corrosion. For flexibility, you can cut it to size to adapt to your setup.
As this component also comes with polyamide insulation, it won't overheat in demanding environments. Polyamide also protects you from electric shock so you can handle it safely. Use this jumper bar to quickly set up electrical connections in your control panels without having to rewire the entire system.
As this component also comes with polyamide insulation, it won't overheat in demanding environments. Polyamide also protects you from electric shock so you can handle it safely. Use this jumper bar to quickly set up electrical connections in your control panels without having to rewire the entire system.
Light weight of 3.76g for reduced strain on equipment
Screw mounting for a secure hold, even with vibration
Simple design requires little or no maintenance
Slim pitch size of 5.2mm to fit into small spaces
Screw mounting for a secure hold, even with vibration
Simple design requires little or no maintenance
Slim pitch size of 5.2mm to fit into small spaces
Approvals
E Exei/II; KEMA
사양
속성 | 값 |
---|---|
Accessory Type | 10-Pole Jumper Bar |
Series | EBL |
For Use With | Terminal Block |
Mounting Type | Screw |