최근 검색 기록

    Siemens SITOP PSU100C Switch Mode DIN Rail Power Supply, 85 → 264V ac ac, dc Input, 24V dc dc Output, 600mA

    RS 제품 번호:
    714-1280
    제조사 부품 번호:
    6EP1331-5BA00
    제조업체:
    Siemens
    Siemens
    모든 DIN Rail Power Supplies 열람하기
    20 <재고있음> 5-9영업일내 홍콩 발송
    Add to Basket
    수량

    추가완료!

    단가 Each

    Was ₩119,734.40

    귀하의 지불

    ₩97,837.55

    수량한팩당
    1 +₩97,837.55
    RS 제품 번호:
    714-1280
    제조사 부품 번호:
    6EP1331-5BA00
    제조업체:
    Siemens
    COO (Country of Origin):
    RO

    참조 문서


    제정법과 컴플라이언스

    COO (Country of Origin):
    RO

    제품 세부 사항

    SITOP Compact Power Supply Unit


    The single phase SITOP compact series are power supplies for the lower performance range. Thanks to the space-saving slim design, they are especially suited to distributed applications in control boxes or in small control cabinets. The SITOP compact range have low-power losses throughout the entire load range. The losses are low even during idling, which means they are perfectly suited for applications that are frequently in stand-by mode. The SITOP PSU100C power supplies have a wide-range input for AC and DC networks; plug-in terminals facilitate the electrical connection.

    Features and Benefits


    • Single phase wide range input from 85 V ac to 264 V ac or 110 V dc to 300 V dc

    • Small mounting surface due to its slim design

    • High efficiency across the entire range

    • Low energy consumption during no-load operation or standby

    • Adjustable output voltage

    • Green LED for "output voltage OK"

    • Plug-in connecting terminals for pre-fabricated wiring and fast electrical connection

    • Wide temperature range: -20 °C to 70 °C

    Product Application Information


    To increase the availability, the SITOP compact power supplies can be combined with DC UPS, redundancy and selectivity modules.

    Why use a DIN Rail power supply?


    The flexibility of DIN Rail mounting systems enables quicker installation time as all devices are able to simply snap onto the metal rails. Power supplies can be easily organised on DIN Rails within enclosed wall boxes or in areas where there is limited space. Similar devices can be mounted next to each other reducing the amount of cabling required. Most power supplies are convection cooled so no cooling fans are needed.
    DIN Rail AC to DC power supplies are widely used in many automation, instrumentation and industrial applications. They are used to power a wide variety of DC operated devices including sensors, motors, actuators, solenoids, relays and many more.

    Points to consider when buying a DIN Rail power supply


    DIN Rail size – There are three common types of DIN Rails. Top Hat, G section and C section. Most have a depth of 7.5 mm or 15 mm. It is wise to check that your power supply is compatible with your DIN Rail.

    Protection types – It is important to choose a power supply that is protected against either short circuit, overload, over temperature or over voltage. Some power supplies also offer a hiccup mode which will allow the PSU to resume operation once the fault is cleared.

    Fixed or adjustable output voltage or current – In test systems it is often convenient to have adjustable DC voltage however in other applications a fixed DC supply may be essential.

    Cabling and wiring – The input/output lines to and from the power supply should be as short as possible with a large cross sectional area to help minimise noise and heat.

    Efficiency – Choose a power supply that has a high efficiency to minimise the amount of power dissipation, especially if the system relies on convection cooling.

    Input voltage range – If the DIN Rail power supply you are buying is to be used in Europe and North America as well as the UK then a universal AC input range of 80 V ac to 264 V ac is required.

    Standards – If the power supply is to be used in the USA for controlling electric motors then it will need to comply with Standard UL508, the safety standard for industrial control equipment.

    Approvals

    CE, cULus, cCSAus, CB, ATEX, cCSAus Class I Div 2, GL, ABS

    Siemens 6EP1331-5BA00 Power Supply, 24 V 600 mA, 14 W


    Convert varied input voltages into a stable output voltage with this DIN rail power supply from Siemens. It takes inputs between 85 and 264V AC and outputs a steady 24V DC, so it's suitable for use in low-powered systems. A green LED makes it simple to monitor the unit's status at a glance. Thanks to its low power loss of 2.6W, this is an energy-efficient choice. You'll commonly find DIN rail power supplies like this one used in mechanical engineering and industrial automation.

    Features & Benefits


    • Compact dimensions of 80 (H) x 22.5 (W) x 100mm (D) to maximise space on your DIN rail
    • Wide operating temperature range between -20°C and +70°C for use in demanding conditions
    • Light weight of 120g means it puts minimal strain on your equipment
    • IP20 rating indicates it's touch-proof and protected against objects larger than 12mm

    How do I wire this power supply?


    This power supply has screw terminals, so you can secure your wires firmly in place without the need for any specialist tools.


    사양

    속성
    AC or DC Input Voltageac, dc
    AC or DC Output Voltagedc
    Input Voltage85 → 264V ac
    Output Voltage24V dc
    Output Current600mA
    Power Rating14W
    Number of Outputs1
    Electrical Phase1
    TypeSwitch Mode
    Height80mm
    Width22.5mm
    Depth100mm
    SeriesSITOP PSU100C
    Hazardous Area CertificationATEX
    Mounting TypeDIN Rail Mount
    Minimum Temperature-20°C
    Maximum Temperature+70°C
    Ripple And Noise200mV Pk-Pk
    Load Regulation0.2%
    20 <재고있음> 5-9영업일내 홍콩 발송
    Add to Basket
    수량

    추가완료!

    단가 Each

    Was ₩119,734.40

    귀하의 지불

    ₩97,837.55

    수량한팩당
    1 +₩97,837.55