Phoenix Contact Electronic Housing Enclosure Type UEGM Series , 79 x 22.5 x 85.5mm, Polyamide DIN Rail Enclosure

The Phoenix Contact range of UEGM electronic housings, or commonly referred to as enclosures are high-quality polyamide PCB housings. These housings give you the ability the mount a PCB onto your DIN rail set-up while still having the total functionality of your PCB, thanks to the DIN rail footing design located on the back of the electronic housing. Assembly of these housings are nice and easy thanks to the overlapping housing parts and not to mention, fully equipped with 3 screw or 6 tab connections per side.

The housing comes in a green polyamide material to match the aesthetic of phoenixs green.

Clicks onto EN rails
Fully equipped with 3 screw or 6 flat pin connectors on each side
For one printed circuit board

If you're struggling to find a PCB that will go into the plastic enclosure, Phoenix have a pre-made PCB. The PCB is UL recognized and will allow for a perfect install. See stock no. below:

• PCB - 648-6012