DSPIC33EP512GP502-I/SP Microchip, 16bit Digital Signal Processor 5.5MHz 512 kB Flash 28-Pin PDIP

본 이미지는 참조용이오니 재확인이 필요하시면 문의해주세요.

모든 Digital Signal Processors 열람하기
대량 구매 할인 기용 가능

Subtotal (1 tube of 15 units)*

₩132,342.60

Add to Basket
수량 선택 또는 입력
마지막 RS 재고
  • 최종적인 120 개 unit(s)이 배송 준비 됨
수량
한팩당
Per Tube*
15 - 15₩8,822.84₩132,352.00
30 - 45₩8,648.00₩129,720.00
60 +₩8,473.16₩127,106.80

* 참고 가격: 실제 구매가격과 다를 수 있습니다

RS 제품 번호:
178-4847
제조사 부품 번호:
DSPIC33EP512GP502-I/SP
제조업체:
Microchip
제품 정보를 선택해 유사 제품을 찾기
모두 선택

브랜드

Microchip

Maximum Frequency

5.5MHz

Data Bus Width

16bit

RAM Size

48 kB

Instruction Set Architecture

RISC

Program Memory Size

512 kB

Program Memory Type

Flash

Mounting Type

Through Hole

Package Type

PDIP

Pin Count

28

Typical Operating Supply Voltage

3 to 3.6 V

Number of UART Channels

2

Pulse Width Modulation

0

Dimensions

35.36 x 7.49 x 3.81mm

Width

7.49mm

Timers

5 x 16 bit, 5 x 32 bit

Number of Ethernet Channels

0

Number of PCI Channels

0

Timer Resolution

16 bit, 32bit

Height

3.81mm

Number of LIN Channels

0

Number of USART Channels

0

Number of I2C Channels

2

Number of SPI Channels

2

Number of ADC Units

1

Length

35.56mm

ADCs

6-ch x 10 bit, 6-ch x 12 bit

ADC Resolution

10 bit, 12bit

Number of CAN Channels

1

ADC Channels

12

Minimum Operating Temperature

-40 °C

USB Channels

1

Maximum Operating Temperature

+85 °C

Number of Timers

10

dsPIC33EPxxxGP/MC20x/50x 16-Bit Digital Signal Controllers


The dsPIC33EPxxxGP/MC20x/50x family of Digital Signal Controllers from Microchip is a comprehensive range of 16-bit DSPs based upon the dsPIC33E core, offering up to 70MIPS performance. The range has an extensive array memory and package variants, all offering a large variety of on board peripherals.

Microcontroller Features


70 MHz Max. CPU Speed
21 to 53 I/O Pins – Model Dependant
Power-On Reset (POR)
Power-Up Timer (PWRT)
Oscillator Start-Up Timer (OST)
Brown-Out Reset (BOR)
Extended Watchdog Timer (WDT)
High/Low-Voltage Detection (HLVD) Module
In-Circuit Serial Programming (ICSP)
In-Circuit Debug (ICD)

Peripherals


High-Speed PWM
10/12-Bit Analogue-to-Digital Converter (ADC) - 6 to 16 Channels Depending on Model
Five 16-Bit Timers
Two 32-Bit Timers
Operational Amplifier – 2 to 3 Depending on Model
Comparators – 3 to 4 Depending on Model
Charge Time Measurement Unit (CTMU) – Supports mTouch™ Capacitive Touch Sensing
Two UART Modules
Two SPI Modules
ECAN™ Module
Two I2C™ Modules
Programmable Cyclic Redundancy Check (CRC)
Peripheral Pin Select (PPS)
Peripheral Trigger Generator (PTG)

For these non-cancellable (NC), and non-returnable (NR) products, Terms and Conditions apply.


관련된 링크들