Si8920AC-IP Skyworks Solutions Inc Differential Current Shunt Monitor Single 8-Pin DIP

본 이미지는 참조용이오니 재확인이 필요하시면 문의해주세요.

모든 Current Sensing Amplifiers 열람하기
대량 구매 할인 기용 가능

Subtotal (1 pack of 2 units)*

₩19,533.20

Add to Basket
수량 선택 또는 입력
일시적 품절
  • 2026년 1월 06일 부터 48 개 단위 배송
더 자세한 내용이 필요하신가요? 필요한 수량을 입력하고 '배송일 확인'을 클릭하면 더 많은 재고 및 배송 세부정보를 확인하실 수 있습니다.
수량
한팩당
한팩당*
2 - 12₩9,766.60₩19,533.20
14 - 24₩9,522.20₩19,044.40
26 +₩9,371.80₩18,743.60

* 참고 가격: 실제 구매가격과 다를 수 있습니다

포장 옵션
RS 제품 번호:
901-3967
제조사 부품 번호:
Si8920AC-IP
제조업체:
Skyworks Solutions Inc
제품 정보를 선택해 유사 제품을 찾기
모두 선택

브랜드

Skyworks Solutions Inc

Product Type

Current Shunt Monitor

Power Supply Type

Single

Maximum Supply Voltage

5.5V

Minimum Supply Voltage

3V

Number of Channels

2

Supply Current

5.5mA

Mount Type

Through Hole

Package Type

DIP

Pin Count

8

GBP - Gain Bandwidth Product

950kHz

Minimum Operating Temperature

-40°C

Length

9.9mm

Height

3.44mm

Standards/Approvals

No

Series

Si8920

Width

6.6 mm

Output Type

Differential

Automotive Standard

AEC-Q100

Maximum Operating Temperature

125°C

COO (Country of Origin):
TH

Si8920 Isolated Amplifier for Current Shunt Measurement


The Si8920 is a galvanically isolated analogue amplifier. Their low voltage and differential input is Ideal for measuring voltage across a current shunt resistor or for any place where a sensor must be isolated from the control system.

Output is a differential analogue signal amplified by either 8.1x or 16.2x. The very low signal delay allows control systems to respond quickly to fault conditions or changes in load. Low offset and gain drift ensure that accuracy is maintained over the entire operating temperature range.

High common mode transient immunity means that the Si8920 will deliver accurate measurements even in the presence of high power switching like would be found in a motor drive system or inverter.

To help evaluate the Si8920 there is a dedicated development kit available - SI8920ISO-KIT (RS N/A). It is populated with the Si8920BC-IP and enables quick connection to a shunt resistor.

The Si8920 is available in 4 variants:

Si8920AC-IP (RS 901-3967) with an input range of ±100 mV in a Gull-Wing DIP-8 package

Si8920BC-IP (RS 901-3976) with an input range of ±200 mV in a Gull-Wing DIP-8 package

Si8920AD-IS (RS 901-3979) with an input range of ±100 mV in a SOIC-16 package

Si8920BD-IS (RS 901-3973) with an input range of ±200 mV in a SOIC-16 package

Current Sensing Amplifiers have a voltage output that is proportional to the volt drop across a very low Value resistor, usually in a high-current power rail. Hence they measure the current flowing in that power rail.

관련된 링크들