KTR, 32 mm OD, 19 mm Bore Steel Coupler 19 mm

본 이미지는 참조용이오니 재확인이 필요하시면 문의해주세요.

모든 Flexible Couplings 열람하기
대량 구매 할인 기용 가능

Subtotal (1 unit)*

₩31,922.40

Add to Basket
수량 선택 또는 입력
재고있음
  • 8 개 단위 배송 준비 완료
더 자세한 내용이 필요하신가요? 필요한 수량을 입력하고 '배송일 확인'을 클릭하면 더 많은 재고 및 배송 세부정보를 확인하실 수 있습니다.
수량
한팩당
1 - 5₩31,922.40
6 - 11₩30,644.00
12 +₩29,367.48

* 참고 가격: 실제 구매가격과 다를 수 있습니다

RS 제품 번호:
869-1689
제조사 부품 번호:
BOWEXM19-HUB-PB
제조업체:
KTR
제품 정보를 선택해 유사 제품을 찾기
모두 선택

브랜드

KTR

Product Type

Coupler

Size

19 mm

Bore Size

19 mm

Outside Diameter

32 mm

Maximum Speed

6000rpm

Torque Rating

48Nm

Misalignment - Angular

0.7°

Misalignment - Parallel

0.2mm

Material

Steel

Series

BoWex

Standards/Approvals

1994, ATEX, EC directive 94/9/EC March 23

Bore Type

Pilot Bore

COO (Country of Origin):
DE

Bowex M Tooth Gear Coupling Hub


BoWex® Curved-tooth gear couplings® are flexible shaft connections for a positive torque transmission and used to compensate for axial, radial and angular shaft misalignment. Using curved-tooth gear couplings® avoids any edge pressure in the spline plus angular and radial displacements are avoided so that BoWex® couplings are almost free from wear.

The material combination of steel hubs and polyamide sleeves allows for maintenance free continuous operation with low friction on the teeth. While any metallic materials tend to "corrode" in case of dry running, slide combinations with polyamide and steel are operative without any lubrication or maintenance.

Due to the double cardanic operation of BoWex® couplings, restoring forces can be neglected in case of angular and radial displacements. Periodic fluctuations in angular velocity do not arise.

BoWex® couplings can be assembled both vertically or horizontally with no need for any special assembly tools.

The smooth and hard surface plus the high thermal stability and resistance to lubricants, fuels, hydraulic fluids, dissolvents, and so on, make polyamide an ideal material for components stressed by sliding, particularly for the coupling production.

Features and Benefits


• Double cardanic curved-tooth gear coupling®

• For all applications in the range of machinery and hydraulics

• Maintenance free due to material combination nylon/steel

• Taper and inch bores for hydraulic pumps

• 100° maximum operating temperature

• Absorbs axial, angular and radial misalignment

• Torsionally rigid

• Short shaft distance

Product Application Information


Food industry, print and paper industry, textile industry, sewage technology, wash-mobiles, chemical and pharmaceutical, offshore units, and so on. For use in aggressive environments (air, water, chemicals, and so on).

Note

Hubs are supplied unbored, it is down to the customer to machine to finish, within the couplings parameters.
Each coupling comprises of three parts (sold separately) two coupling hubs and a gear coupling sleeve.

Approvals

Atex

관련된 링크들