Ruland, 38.1 mm OD 16 mm, 57.15 mm Length 16 mm Coupler
- RS 제품 번호:
- 689-9705
- 제조사 부품 번호:
- FCMR38-16-16-SS
- 제조업체:
- Ruland
대량 구매 할인 기용 가능
Subtotal (1 unit)*
₩337,779.60
재고있음
- 추가로 2026년 2월 24일 부터 6 개 단위 배송
더 자세한 내용이 필요하신가요? 필요한 수량을 입력하고 '배송일 확인'을 클릭하면 더 많은 재고 및 배송 세부정보를 확인하실 수 있습니다.
수량 | 한팩당 |
|---|---|
| 1 - 5 | ₩337,779.60 |
| 6 - 11 | ₩324,262.40 |
| 12 + | ₩310,764.00 |
* 참고 가격: 실제 구매가격과 다를 수 있습니다
- RS 제품 번호:
- 689-9705
- 제조사 부품 번호:
- FCMR38-16-16-SS
- 제조업체:
- Ruland
사양
참조 문서
제정법과 컴플라이언스
제품 세부 사항
제품 정보를 선택해 유사 제품을 찾기
모두 선택 | 제품 정보 | 값 |
|---|---|---|
| 브랜드 | Ruland | |
| Product Type | Coupler | |
| Outside Diameter | 38.1 mm | |
| Length | 57.15mm | |
| Maximum Speed | 6000rpm | |
| Torque Rating | 10.73Nm | |
| Moment of Inertia | 83.407 x 10-6 kg/m² | |
| Number of Beams | 6 | |
| Misalignment - Angular | 3° | |
| Style | Clamp | |
| Misalignment - Parallel | 0.76mm | |
| Misalignment - Axial | 0.38mm | |
| Bore Size B | 16mm | |
| Minimum Operating Temperature | -40°C | |
| Bore Size A | 16mm | |
| Material | Stainless Steel | |
| Maximum Operating Temperature | 176°C | |
| Standards/Approvals | RoHS3, REACH, DIN 912 12.9 | |
| Screw Size | M6 | |
| 모두 선택 | ||
|---|---|---|
브랜드 Ruland | ||
Product Type Coupler | ||
Outside Diameter 38.1 mm | ||
Length 57.15mm | ||
Maximum Speed 6000rpm | ||
Torque Rating 10.73Nm | ||
Moment of Inertia 83.407 x 10-6 kg/m² | ||
Number of Beams 6 | ||
Misalignment - Angular 3° | ||
Style Clamp | ||
Misalignment - Parallel 0.76mm | ||
Misalignment - Axial 0.38mm | ||
Bore Size B 16mm | ||
Minimum Operating Temperature -40°C | ||
Bore Size A 16mm | ||
Material Stainless Steel | ||
Maximum Operating Temperature 176°C | ||
Standards/Approvals RoHS3, REACH, DIN 912 12.9 | ||
Screw Size M6 | ||
- COO (Country of Origin):
- US
Stainless Steel Flexible Shaft Couplings
Designed to perform where higher speeds, greater misalignment, and limited lubrication would exceed the capabilities of other couplings. Each coupling is manufactured as one piece, thereby eliminating mechanical joints and possible failure points.Two fixing styles available:,Typical applications include encoders, stepper motors, robotics, measuring instruments, servo systems, pumps, valves, fans etc., (i) Set Screw style is secured using one grub-screw per shaft (staggered at 120°) , (ii) Clamp style fixing uses one socket head cap screw per shaft.
Constant velocity couplings with high torque capacity and zero backlash
Torsionally rigid one-piece construction
Not temperature sensitive
High or low speed operation and reversible
No lubrication required
Up to 3° of axial misalignment allowable
Note
The coupling shown represents the clamp style fixing
관련된 링크들
- Ruland, 38.1 mm OD 16 mm, 57.15 mm Length 16 mm Coupler
- Ruland, 38.1 mm OD 15 mm, 57.2 mm Length Coupler 15 mm
- Ruland, 38.1 mm OD 15 mm, 57.2 mm Length Coupler 12 mm
- Ruland, 38.1 mm OD 12 mm, 57.15 mm Length 12 mm Coupler
- Ruland, 38.1 mm OD 14 mm, 57.15 mm Length 14 mm Coupler
- Ruland, 38.1 mm OD 16 mm, 57.2 mm Length Coupler 12 mm
- Ruland, 38.1 mm OD 16 mm, 57.2 mm Length 10 mm Coupler
- Ruland, 38.1 mm OD 10 mm, 57.2 mm Length Coupler 10 mm