RS PRO HSS Drill Bit, 20.5 mm Head, 3 Flute(s), 90 °, 1 Piece(s)
- RS 제품 번호:
- 673-8710
- 제조업체:
- RS PRO
대량 구매 할인 기용 가능
Subtotal (1 unit)*
₩43,052.00
재고있음
- 112 개 단위 배송 준비 완료
- 추가로 2026년 4월 15일 부터 100 개 단위 배송
더 자세한 내용이 필요하신가요? 필요한 수량을 입력하고 '배송일 확인'을 클릭하면 더 많은 재고 및 배송 세부정보를 확인하실 수 있습니다.
수량 | 한팩당 |
|---|---|
| 1 - 4 | ₩43,052.00 |
| 5 + | ₩35,438.00 |
* 참고 가격: 실제 구매가격과 다를 수 있습니다
- RS 제품 번호:
- 673-8710
- 제조업체:
- RS PRO
사양
참조 문서
제정법과 컴플라이언스
제품 세부 사항
제품 정보를 선택해 유사 제품을 찾기
모두 선택 | 제품 정보 | 값 |
|---|---|---|
| 브랜드 | RS PRO | |
| Head Diameter | 20.5mm | |
| Product Type | Drill Bit | |
| Countersink Angle | 90° | |
| Number of Flutes | 3 | |
| Material | HSS | |
| Overall Length | 63mm | |
| Shank Diameter | 10mm | |
| Number of Pieces | 1 | |
| Shank Length | 42mm | |
| Standards/Approvals | No | |
| 모두 선택 | ||
|---|---|---|
브랜드 RS PRO | ||
Head Diameter 20.5mm | ||
Product Type Drill Bit | ||
Countersink Angle 90° | ||
Number of Flutes 3 | ||
Material HSS | ||
Overall Length 63mm | ||
Shank Diameter 10mm | ||
Number of Pieces 1 | ||
Shank Length 42mm | ||
Standards/Approvals No | ||
제외
- COO (Country of Origin):
- CN
RS PRO Countersink 63 mm x 20.5 mm 1 Piece
If you need an easy way to install countersunk screws, choose this countersink drill bit from RS PRO. It creates a crater at the surface of a conventional drilled hole so you can fully embed your countersunk screws in a surface.
The shaft of the drill bit fits into your drill driver securely and is thick enough to withstand high-pressure drilling into dense materials. The hexagonal end cuts through the surface material and shaves away the edges as the end thickens out, leaving a smooth, clean hole.
The end has three flutes to reduce vibration for greater precision during use. Use this drill bit at slower speeds for extra steadiness and accuracy. You can also use it after regular drilling to remove tough burr distortions at the surface of the hole.
Features and Benefits
• Countersink drill bit type
• Countersink angle of 90º
• High-speed steel (HSS) material
• Three flutes
• One piece
• Head diameter of 20.5 mm
• Overall length of 63 mm
• Shank diameter of 10 mm
• Shank length of 42 mm
관련된 링크들
- EXACT HSS Drill Bit, 25 mm Head, 3 Flute(s), 90 °, 1 Piece(s)
- RS PRO HSS Drill Bit, 16 mm Head, 3 Flute(s), 90 °, 1 Piece(s)
- RS PRO HSS Drill Bit, 12 mm Head, 3 Flute(s), 90 °, 1 Piece(s)
- RS PRO HSS Drill Bit, 20 mm Head, 5 Flute(s), 90 °, 1 Piece(s)
- RS PRO HSS Drill Bit, 20 mm Head, 3 Flute(s), 90 °, 1 Piece(s)
- RS PRO HSS Drill Bit, 16 mm Head, 5 Flute(s), 90 °, 1 Piece(s)
- Noga HSS Drill Bit, 10.4 mm Head, 1 Flute(s), 90 °, 1 Piece(s)
- RS PRO HSS Drill Bit, 8 mm Head, 3 Flute(s), 90 °, 1 Piece(s)