Bosch Rexroth Track Roller Mounting Block 250N, 50mm Length

모든 Conveyor Guide Rails 열람하기
대량 구매 할인 기용 가능

Subtotal (1 Box of 10 units)*

₩60,009.60

Add to Basket
수량 선택 또는 입력
재고있음
  • 추가로 2025년 12월 05일 부터 23 개 단위 배송
더 자세한 내용이 필요하신가요? 필요한 수량을 입력하고 '배송일 확인'을 클릭하면 더 많은 재고 및 배송 세부정보를 확인하실 수 있습니다.
Box(es)
Per Box
한팩당*
1 - 5₩60,009.60₩6,000.96
6 +₩57,622.00₩5,762.20

* 참고 가격: 실제 구매가격과 다를 수 있습니다

RS 제품 번호:
665-7242
제조사 부품 번호:
3 842 535 667
제조업체:
Bosch Rexroth
제품 정보를 선택해 유사 제품을 찾기
모두 선택

브랜드

Bosch Rexroth

Component Type

Track Roller Mounting Block

Length

50mm

Load Capacity

250N

제외

COO (Country of Origin):
DE

Bosch Rexroth Track Roller Mounting Block, PA Construction, Black - EcoFlow Series - 3 842 535 667


Keep your conveyor on track with these track roller mounting blocks from Bosch Rexroth. The 50mm-long blocks are supplied in a pack of 10, for you to use with aluminium strut profiles when assembling a conveyor track. Need to adjust or repair your setup? No problem – these roller blocks can be retrofitted to replace individual rollers without having to disassemble the frame. You can fit them with the simple hammer nut and bolt included.

Features & Benefits


• PA material combines strength and wear resistance for long-term performance
• Hex socket allows you to tighten the screw with a hex key
• Load capacity of 250N for conveying medium-weight loads

Applications


• Factories
• Packaging plants
• Workshops

What's a hammer nut?


A hammer nut drops into a slot, which holds it stationary during tightening. It's used to build everything from racks to robots, thanks to its simplicity and ease of installation.


Ecoflow Conveyor Tracks


Conveyor tracks based on alumuminium profiles with uniform rollers made of plastic and steel. For fast, simple construction of conveyor or manual slide sections. Can be used in conjunction with Bosch Rexroth Mechanical components.

관련된 링크들