Schneider Electric TeSys K LC1K Contactor, 24 V ac Coil, 3-Pole, 12 A, 3NO, 690 V ac

Contactors have a switching voltage of 440Vac and a coil consumption (ac coils 50 / 60Hz rated) of 4.5VA (Hold in) and 30VA (inrush).

Utilisation category AC3
DIN rail or screw mounting
Ambient air temperature range -25 to +50°C

• Highly reliable
• Excellent quality
• Easily installed accessories

Contactor utilisation categories define the current making and breaking values, based on the type of load to be controlled and the operating cycle conditions.
AC-1: This applies to all AC devices with a power factor of at least 0.95. Example of use: resistive load, heating, distribution.
AC-3: This applies to squirrel cage motors where breaking occurs while the motor is running. Example of use: all squirrel cage motors, lifts, escalators, conveyors, bucket elevators, compressors, pumps, mixers, air conditioning units.

• Auxiliary contact blocks with serrated wiping action
• Front mount dust tight auxiliary contact blocks
• Pneumatic time delay blocks
• Transient voltage surge suppressors
• Interface modules and electronic timers
• Mechanical latching blocks

CSA, UL, NEMKO, DEMKO, SEMKO, FIMKO

BS5424 Part 1/IEC 947, VDE 0660, NFC63 110

The Schneider Electric LC1K1201B7 model is a 3-pole contactor featuring a utilisation category of AC-1 and AC-3 and AC-4. The control circuit voltage is 24 V AC 50/60 Hz with 3 NO power pole contact composition. The rated operation current is 20 A (at <50 °C) at <= 440 V AC AC-1 for power circuit, 12 A at <= 440 V AC AC-3 for power circuit and 16 A (at <70 °C) at 690 V AC AC-1 for power circuit.