RS PRO HSS Cone Cutter 5mm x 20mm
- RS 제품 번호:
- 499-267
- 제조업체:
- RS PRO
1 <재고있음> 5-9영업일내 홍콩 발송
12 <재고있음> 5-9영업일내 홍콩 발송
추가완료!
단가 1세트
₩57,237.357
| Set(s) | Per Set |
| 1 - 4 | ₩57,237.357 |
| 5 + | ₩47,105.294 |
- RS 제품 번호:
- 499-267
- 제조업체:
- RS PRO
참조 문서
제정법과 컴플라이언스
해당 안됨
- COO (Country of Origin):
- DE
제품 세부 사항
Sheet metal hole cutter, spiral tap, blank
HSS hole cutter with spiral tap
For burr-free drilling and planing pipes, sheet metals and profiles, as well as moulding, retro drilling and expanding cut-outs
Suitable for construction steel, stainless steel, non-ferrous metals, Plexiglas, plastic and wood up to 6 mm thick
Crosswise grinding means no centre-punching necessary, drill bits do not run
Diameter guide lasered into the tap, legible even when rotating
Three-faced driving shaft, prevents slipping in the drill chuck
For burr-free drilling and planing pipes, sheet metals and profiles, as well as moulding, retro drilling and expanding cut-outs
Suitable for construction steel, stainless steel, non-ferrous metals, Plexiglas, plastic and wood up to 6 mm thick
Crosswise grinding means no centre-punching necessary, drill bits do not run
Diameter guide lasered into the tap, legible even when rotating
Three-faced driving shaft, prevents slipping in the drill chuck
Warning
Not suitable for aluminium. Use without cooling agents.
Supplied with
Set, stock no. 499-261 contains 1 x 4 → 20 mm hole cutter and 1 x 5 → 31 mm
사양
속성 | 값 |
|---|---|
| Drill Bit Type | Cone Cutter |
| Material | HSS |
| Minimum Head Size | 5mm |
| Maximum Head Size | 20mm |