LM311N/NOPB Texas Instruments, Comparator, Single Ended O/P, 200ns Maximum of 36 V 8-Pin PDIP
- RS 제품 번호:
- 124-4526
- 제조사 부품 번호:
- LM311N/NOPB
- 제조업체:
- Texas Instruments
대량 구매 할인 기용 가능
Subtotal (1 pack of 10 units)*
₩24,289.60
현재 액세스할 수 없는 재고 정보 - 나중에 다시 확인해 주세요.
수량 | 한팩당 | 한팩당* |
|---|---|---|
| 10 - 30 | ₩2,428.96 | ₩24,291.48 |
| 40 - 70 | ₩2,368.80 | ₩23,684.24 |
| 80 - 90 | ₩2,308.64 | ₩23,092.04 |
| 100 - 190 | ₩2,252.24 | ₩22,514.88 |
| 200 + | ₩2,195.84 | ₩21,952.76 |
* 참고 가격: 실제 구매가격과 다를 수 있습니다
- RS 제품 번호:
- 124-4526
- 제조사 부품 번호:
- LM311N/NOPB
- 제조업체:
- Texas Instruments
사양
참조 문서
제정법과 컴플라이언스
제품 세부 사항
제품 정보를 선택해 유사 제품을 찾기
모두 선택 | 제품 정보 | 값 |
|---|---|---|
| 브랜드 | Texas Instruments | |
| Comparator Type | Voltage | |
| Mounting Type | Through Hole | |
| Package Type | PDIP | |
| Power Supply Type | Single | |
| Output Type | Single Ended | |
| Number of Channels per Chip | 1 | |
| Typical Response Time | 200ns | |
| Pin Count | 8 | |
| Typical Single Supply Voltage | Maximum of 36 V | |
| Dimensions | 10.16 x 6.6 x 4.57mm | |
| Length | 10.16mm | |
| Width | 6.6mm | |
| Height | 4.57mm | |
| Typical Voltage Gain | 200 V/mV | |
| Maximum Operating Temperature | +70 °C | |
| Minimum Operating Temperature | 0 °C | |
| 모두 선택 | ||
|---|---|---|
브랜드 Texas Instruments | ||
Comparator Type Voltage | ||
Mounting Type Through Hole | ||
Package Type PDIP | ||
Power Supply Type Single | ||
Output Type Single Ended | ||
Number of Channels per Chip 1 | ||
Typical Response Time 200ns | ||
Pin Count 8 | ||
Typical Single Supply Voltage Maximum of 36 V | ||
Dimensions 10.16 x 6.6 x 4.57mm | ||
Length 10.16mm | ||
Width 6.6mm | ||
Height 4.57mm | ||
Typical Voltage Gain 200 V/mV | ||
Maximum Operating Temperature +70 °C | ||
Minimum Operating Temperature 0 °C | ||
- COO (Country of Origin):
- GB
Comparators, Texas Instruments
Texas Instruments’ range of voltage comparators includes not only conventional single, dual and quad comparator packages but also window comparators and over- & under-voltage supervisors.
Although comparators and operational amplifiers are superficially similar devices their operation in practical applications is very different. Op amps are intended for linear operation accompanied by suitable feedback whereas comparators are tailored for rapid switching and generally operated in open-loop mode. Dedicated voltage comparators have significantly shorter propagation delays and are capable of faster response times under saturated conditions. Most comparators are also more tolerant of high differential input voltages and many have open-collector outputs allowing parallel operation with other devices.
Although comparators and operational amplifiers are superficially similar devices their operation in practical applications is very different. Op amps are intended for linear operation accompanied by suitable feedback whereas comparators are tailored for rapid switching and generally operated in open-loop mode. Dedicated voltage comparators have significantly shorter propagation delays and are capable of faster response times under saturated conditions. Most comparators are also more tolerant of high differential input voltages and many have open-collector outputs allowing parallel operation with other devices.