TS3121IYLT STMicroelectronics 1-Channel Comparator Open Drain O/P, 5.5 V 1.7 V 5-Pin SOT-323-5

본 이미지는 참조용이오니 재확인이 필요하시면 문의해주세요.

대량 구매 할인 기용 가능

Subtotal (1 unit)*

₩4,496.96

Add to Basket
수량 선택 또는 입력
재고있음
  • 3,000 개 단위 배송 준비 완료
더 자세한 내용이 필요하신가요? 필요한 수량을 입력하고 '배송일 확인'을 클릭하면 더 많은 재고 및 배송 세부정보를 확인하실 수 있습니다.
수량
한팩당
1 - 9₩4,496.96
10 - 99₩4,038.24
100 - 499₩3,726.16
500 - 999₩3,455.44
1000 +₩3,102.00

* 참고 가격: 실제 구매가격과 다를 수 있습니다

포장 옵션
RS 제품 번호:
285-644
제조사 부품 번호:
TS3121IYLT
제조업체:
STMicroelectronics
제품 정보를 선택해 유사 제품을 찾기
모두 선택

브랜드

STMicroelectronics

Product Type

Comparator

Comparator Type

Analogue Comparator

Mount Type

Surface

Package Type

SOT-323-5

Output Type

Open Drain

Number of Channels

1

Pin Count

5

Maximum Supply Voltage

5.5V

Minimum Supply Voltage

1.7V

Minimum Operating Temperature

-40°C

Maximum Operating Temperature

125°C

Series

TS

Length

2.9mm

Standards/Approvals

AEC-Q100

Width

2.8 mm

Height

1.6mm

Automotive Standard

AEC-Q100

Supply Current

125μA

COO (Country of Origin):
MY
The STMicroelectronics TS3121 single comparators permit high-speed response time at low power consumption over a supply voltage specified from 1.7 to 5.5 V. These devices operate over a wide temperature range from -40 °C to +125 °C making them Ideal for industrial and automotive applications with the associated qualification. Thanks to an embedded fail-safe circuit, the TS3121 and the TS3121A can operate with input/output pins biased while the supply pin is shut down to VCC = 0 V for energy saving applications. A guaranteed start-up time ensures a stable output condition after activating the supply rail. Thanks to their small package size, the TS3121 and the TS3121A can be used in applications where space on the board is limited. It can thus reduce the overall cost of the PCB.

Low offset voltage 2mV max 25°C for A-grade version

Low power consumption 70 μA typ

Wide supply voltage 1.7 to 5.5 V

Propagation delay 60 ns

Fail-safe input and output pins

Input and output pins withstand voltages higher than VCC

Fail safe architecture keeps output in high impedance when VCC = 0 V

Guaranteed start-up time allows sequential on and off cycles of VCC

High ESD tolerance 4 kV HBM

관련된 링크들