대량 구매 할인 기용 가능
Subtotal (1 unit)*
₩115,187.60
일시적 품절
- 2025년 12월 29일 부터 1 개 단위 배송
더 자세한 내용이 필요하신가요? 필요한 수량을 입력하고 '배송일 확인'을 클릭하면 더 많은 재고 및 배송 세부정보를 확인하실 수 있습니다.
수량 | 한팩당 |
|---|---|
| 1 - 4 | ₩115,187.60 |
| 5 + | ₩112,894.00 |
* 참고 가격: 실제 구매가격과 다를 수 있습니다
- RS 제품 번호:
- 117-6737
- 제조사 부품 번호:
- NCN5150SOICGEVB
- 제조업체:
- onsemi
사양
참조 문서
제정법과 컴플라이언스
제품 세부 사항
제품 정보를 선택해 유사 제품을 찾기
모두 선택 | 제품 정보 | 값 |
|---|---|---|
| 브랜드 | onsemi | |
| Kit Classification | Evaluation Kit | |
| 모두 선택 | ||
|---|---|---|
브랜드 onsemi | ||
Kit Classification Evaluation Kit | ||
- COO (Country of Origin):
- US
NCN5150SOICGEVB - M-BUS Transceiver Evaluation Board, ON Semiconductor
The ON Semiconductor NCN5150SOICGEVB evaluation board features the NCN5150 (RS 796-1198) M-BUS transceiver in an SOIC package. The board includes all components needed for operating and demonstrating this device.
The NCN5150 is an integrated slave transceiver for use in two-wire Meter Bus (M-BUS) slave devices and repeaters. It includes a programmable power level of up to 2 unit loads which are available for use in external circuits through a 3.3 V LDO regulator. It can provide communication up to the maximum M-BUS communication speed of 38400 Bd (half-duplex).
The NCN5150 is an integrated slave transceiver for use in two-wire Meter Bus (M-BUS) slave devices and repeaters. It includes a programmable power level of up to 2 unit loads which are available for use in external circuits through a 3.3 V LDO regulator. It can provide communication up to the maximum M-BUS communication speed of 38400 Bd (half-duplex).
Single-chip MBUS Transceiver
Up to 38400 Bd UART Communication Speeds
Integrated 3.3 V VDD LDO Regulator with Extended Peak Current
Adjustable I/O Levels
Low Bus Voltage Operation
Polarity Independent
Power-Fail Function
Up to 38400 Bd UART Communication Speeds
Integrated 3.3 V VDD LDO Regulator with Extended Peak Current
Adjustable I/O Levels
Low Bus Voltage Operation
Polarity Independent
Power-Fail Function
For these non-cancellable (NC), and non-returnable (NR) products, Terms and Conditions apply.
M-Bus (Meter-Bus) is a European standard (EN 13757-2 physical and link layer, EN 13757-3 application layer) for the remote reading of gas or electricity meters.
관련된 링크들
- onsemi 6 unit loads, Evaluation Board, Wired M-BUS Slave Transceiver NCN5150 Evaluation Kit for Two-Wire Meter Bus
- onsemi NCN5100 Arduino Shield Evaluation Board NCN5121 transceiver Evaluation Board for NCN5100 Arduino NCN5121ASGEVB
- onsemi NCN5100 Arduino Shield Evaluation Board NCN5110 transceiver Evaluation Board for NCN5100 Arduino NCN5110ASGEVB
- onsemi NCN8026AMNGEVB, NCN8026A Evaluation Board Evaluation Board for NCN8026A
- onsemi NCN26010 SPI Evaluation Board NCN26010XMNTXG
- onsemi NCN5150DG Line Transceiver, 16-Pin SOIC
- onsemi Onsemi NCN5140REF4TGEVB for NCN5140
- onsemi NCN5140 Buck Converter for NCN5140S for Physical Interface Adapter
