ITT Cannon Male Crimp Circular Connector Contact, Contact Size 16 AWG, Wire Size 16AWG, 18 AWG
- RS 제품 번호:
- 273-5348
- 제조사 부품 번호:
- T2P16MC4LT / 192900-0002
- 제조업체:
- ITT Cannon
본 이미지는 참조용이오니 재확인이 필요하시면 문의해주세요.
대량 구매 할인 기용 가능
Subtotal (1 pack of 10 units)*
₩9,789.00
재고있음
- 2,480 개 단위 배송 준비 완료
- 추가로 2026년 6월 26일 부터 3,000 개 단위 배송
더 자세한 내용이 필요하신가요? 필요한 수량을 입력하고 '배송일 확인'을 클릭하면 더 많은 재고 및 배송 세부정보를 확인하실 수 있습니다.
수량 | 한팩당 | 한팩당* |
|---|---|---|
| 10 - 20 | ₩978.90 | ₩9,789.00 |
| 30 - 40 | ₩957.45 | ₩9,574.50 |
| 50 + | ₩937.95 | ₩9,379.50 |
* 참고 가격: 실제 구매가격과 다를 수 있습니다
- RS 제품 번호:
- 273-5348
- 제조사 부품 번호:
- T2P16MC4LT / 192900-0002
- 제조업체:
- ITT Cannon
사양
참조 문서
제정법과 컴플라이언스
제품 세부 사항
제품 정보를 선택해 유사 제품을 찾기
모두 선택 | 제품 정보 | 값 |
|---|---|---|
| 브랜드 | ITT Cannon | |
| Product Type | Circular Connector Contact | |
| Gender | Male | |
| Contact Size | 16 AWG | |
| Wire Size | 16, 18AWG | |
| Current | 13A | |
| Series | T2P | |
| For Use With | Trident & APD 6/7 Way Connectors | |
| Contact Type | Signal | |
| Length | 27.69mm | |
| Contact Plating | Tin | |
| Voltage | 30V | |
| Contact Material | Copper Alloy | |
| Termination Type | Crimp | |
| Minimum Operating Temperature | -55°C | |
| Maximum Operating Temperature | 125°C | |
| Maximum Contact Resistance | 5mΩ | |
| Standards/Approvals | No | |
| 모두 선택 | ||
|---|---|---|
브랜드 ITT Cannon | ||
Product Type Circular Connector Contact | ||
Gender Male | ||
Contact Size 16 AWG | ||
Wire Size 16, 18AWG | ||
Current 13A | ||
Series T2P | ||
For Use With Trident & APD 6/7 Way Connectors | ||
Contact Type Signal | ||
Length 27.69mm | ||
Contact Plating Tin | ||
Voltage 30V | ||
Contact Material Copper Alloy | ||
Termination Type Crimp | ||
Minimum Operating Temperature -55°C | ||
Maximum Operating Temperature 125°C | ||
Maximum Contact Resistance 5mΩ | ||
Standards/Approvals No | ||
Signal Contacts
Two-part construction.Contacts may be crimped by a plier type or ratchet style tool.
Neptune
Based on Trident Ringlok series, the Neptune range combines power and signal contacts. Widely used in automotive, marine and process control industries, they feature a strong bayonet coupling system with standard and reversed pin/socket combinations. A wide selection of backshell accessories, rear housings and dust caps are available.,To maintain IP67 rating the rear of the connectors have a rubber seal which is pierced upon contact insertion. The seal is held in place by a screw ring (as supplied) which may be replaced with the appropriate size backshell. For IP67 rating to be maintained, wire insulation diameters should be within the following diameters: Signal wires: 1.7 to 2.7mm, Power wires : 2.7 to 4.0mm.,Number of contacts shown as power/signal eg 2//13.