SEGGER Flasher Portable PLUS Chip Programmer, Programmer for Flash Microcontrollers
- RS 제품 번호:
- 136-7686
- 제조사 부품 번호:
- 5.16.02
- 제조업체:
- SEGGER
대량 구매 할인 기용 가능
Subtotal (1 unit)*
₩2,837,126.80
재고있음
- 추가로 2026년 4월 06일 부터 6 개 단위 배송
더 자세한 내용이 필요하신가요? 필요한 수량을 입력하고 '배송일 확인'을 클릭하면 더 많은 재고 및 배송 세부정보를 확인하실 수 있습니다.
수량 | 한팩당 |
|---|---|
| 1 - 4 | ₩2,837,126.80 |
| 5 + | ₩2,553,416.00 |
* 참고 가격: 실제 구매가격과 다를 수 있습니다
- RS 제품 번호:
- 136-7686
- 제조사 부품 번호:
- 5.16.02
- 제조업체:
- SEGGER
사양
참조 문서
제정법과 컴플라이언스
제품 세부 사항
제품 정보를 선택해 유사 제품을 찾기
모두 선택 | 제품 정보 | 값 |
|---|---|---|
| 브랜드 | SEGGER | |
| Sub Type | Programmer | |
| Product Type | Chip Programmer | |
| For Use With | Flash Microcontrollers | |
| Programmer Name | Flasher Portable PLUS | |
| Interface Type | SWD | |
| Standards/Approvals | No | |
| 모두 선택 | ||
|---|---|---|
브랜드 SEGGER | ||
Sub Type Programmer | ||
Product Type Chip Programmer | ||
For Use With Flash Microcontrollers | ||
Programmer Name Flasher Portable PLUS | ||
Interface Type SWD | ||
Standards/Approvals No | ||
Flasher Portable PLUS Programmer
Flasher Portable PLUS has been designed to fill the need for a portable, battery-operated production-grade Flash memory programmer used for in-field firmware updates. Initial setup/preparation for stand-alone mode operation is done via the J-Flash software. It supports storage of multiple configurations/image files, so one unit can be used for different targets. The Flasher Portable PLUS represents a significant upgrade to its predecessor, the Flasher Portable.
Supported Processors
• ARM 7/9/11;• ARM Cortex-A5/A7/A8/A9/A12/A15/A17;• ARM Cortex-M0/M0+/M1/M3/M4/M7;• ARM Cortex-R4/R5;• Freescale e200z0 (PowerPC);• Renesas RX610/RX621/RX62G/RX62N/RX62T/RX630/RX631/RX63N/RX63T
Features
• Stand-alone in-circuit-programmer;• Powered by 680mAh rechargeable Li-Ion battery or USB;• Up to 10 hours programming with one battery charge;• Stores up to eight configurations/data files;• 1.8in LCD panel for display of programming status;• Pushbutton selects between stored images/configurations;• 128MB memory for configuration and data file storage;• Supports internal and external Flash devices;• Data files can be updated via mass storage or via J-Flash;• Host interface: USB 2.0;• Target interfaces: 20-pin JTAG/SWD/FINE/SPD;• Programming speed typically between 30KB/sec and 1MB/sec;• Max programming speed depends on target hardware and max programming speed of the Flash memory;• Authorized Flashing limits number of programming cycles and protects against non-authorized access;• Dimensions: 126 x 70 x 28mm;• Free software updates, 1 year of support
Supplied with
20-pin 0.1in target ribbon cable, USB cable