제조사부품번호

Infineon, CAN Caps 5 Mbps, 8-Pin PG-DSO-8

RS 제품 번호:: 273-7555
제조사 부품 번호:: TLE9351SJXTMA1
제조업체:: Infineon

Infineon, CAN Caps 5 Mbps, 8-Pin PG-DSO-8

본 이미지는 참조용이오니 재확인이 필요하시면 문의해주세요.

대량 구매 할인 기용 가능

Subtotal (1 pack of 5 units)*

₩11,750.00

재고있음

2,500 개 단위 배송 준비 완료

더 자세한 내용이 필요하신가요? 필요한 수량을 입력하고 '배송일 확인'을 클릭하면 더 많은 재고 및 배송 세부정보를 확인하실 수 있습니다.

수량	한팩당	한팩당*
5 - 45	₩2,350.00	₩11,750.00
50 - 95	₩2,011.60	₩10,058.00
100 - 245	₩1,534.08	₩7,670.40
250 - 995	₩1,507.76	₩7,538.80
1000 +	₩1,060.32	₩5,301.60

* 참고 가격: 실제 구매가격과 다를 수 있습니다

RS 제품 번호:: 273-7555
제조사 부품 번호:: TLE9351SJXTMA1
제조업체:: Infineon

참조 문서

제정법과 컴플라이언스

제품 세부 사항

제품 정보를 선택해 유사 제품을 찾기

모두 선택	제품 정보	값
	브랜드	Infineon
	Product Type	CAN Caps
	Maximum Data Rate	5Mbps
	Number of Transceivers	1
	Sub Type	1/1 Half-Duplex CAN Transceiver
	Power Down Mode	Yes
	Supply Current	5mA
	Mount Type	Surface
	Interface Type	ISO 7637
	Package Type	PG-DSO-8
	Pin Count	8
	Minimum Supply Voltage	-0.3V
	Maximum Supply Voltage	6V
	Minimum Operating Temperature	-40°C
	ESD Protection	Yes
	Maximum Operating Temperature	150°C
	Width	3.9 mm
	Length	4.9mm
	Height	1.75mm
	Series	TLE9351SJ
	Standards/Approvals	ISO 7637, AEC‑Q100, SAE J1939, RoHS, ISO 11898‑2/‑5
	Automotive Standard	AEC-Q100

	모두 선택
	브랜드 Infineon
	Product Type CAN Caps
	Maximum Data Rate 5Mbps
	Number of Transceivers 1
	Sub Type 1/1 Half-Duplex CAN Transceiver
	Power Down Mode Yes
	Supply Current 5mA
	Mount Type Surface
	Interface Type ISO 7637
	Package Type PG-DSO-8
	Pin Count 8
	Minimum Supply Voltage -0.3V
	Maximum Supply Voltage 6V
	Minimum Operating Temperature -40°C
	ESD Protection Yes
	Maximum Operating Temperature 150°C
	Width 3.9 mm
	Length 4.9mm
	Height 1.75mm
	Series TLE9351SJ
	Standards/Approvals ISO 7637, AEC‑Q100, SAE J1939, RoHS, ISO 11898‑2/‑5
	Automotive Standard AEC-Q100

Datasheet - TLE9351SJXTMA1

The Infineon High speed CAN transceiver used in HS CAN systems for automotive applications as well as for industrial applications. It is designed to fulfil the requirements of ISO 11898 2 2016 physical layer specification as well as SAE J1939 and SAE J2284. As an interface between the physical bus layer and the HS CAN protocol controller, the CAN transceiver is designed to protect the microcontroller against interferences generated inside the network. A very high ESD robustness and the optimized RF immunity allows the use in automotive applications without additional protection devices, such as suppressor diodes or common mode chokes.

RoHS compliant

TxD time out function

Over temperature protection

Protected against automotive transients

Stand by mode with minimized quiescent current

Infineon, CAN Caps 5 Mbps, 8-Pin PG-DSO-8

관련된 링크들