onsemi NCV7327D10R2G, LIN Transceiver 20 kbps, 8-Pin SOIC
- RS 제품 번호:
- 195-2453
- 제조사 부품 번호:
- NCV7327D10R2G
- 제조업체:
- onsemi
본 이미지는 참조용이오니 재확인이 필요하시면 문의해주세요.
대량 구매 할인 기용 가능
Subtotal (1 pack of 50 units)*
₩67,492.00
마지막 RS 재고
- 최종적인 8,500 개 unit(s)이 배송 준비 됨
수량 | 한팩당 | 한팩당* |
|---|---|---|
| 50 - 700 | ₩1,349.84 | ₩67,510.80 |
| 750 - 1450 | ₩1,316.00 | ₩65,818.80 |
| 1500 + | ₩1,295.32 | ₩64,803.60 |
* 참고 가격: 실제 구매가격과 다를 수 있습니다
- RS 제품 번호:
- 195-2453
- 제조사 부품 번호:
- NCV7327D10R2G
- 제조업체:
- onsemi
사양
제정법과 컴플라이언스
제품 세부 사항
제품 정보를 선택해 유사 제품을 찾기
모두 선택 | 제품 정보 | 값 |
|---|---|---|
| 브랜드 | onsemi | |
| Product Type | LIN Transceiver | |
| Maximum Data Rate | 20kbps | |
| Number of Transceivers | 1 | |
| Sub Type | LIN Transceiver | |
| Power Down Mode | Standby | |
| Supply Current | 6.5mA | |
| Mount Type | Surface | |
| Interface Type | SAE J2602, LIN | |
| Package Type | SOIC | |
| Pin Count | 8 | |
| Minimum Supply Voltage | 5V | |
| Maximum Supply Voltage | 18V | |
| ESD Protection | Yes | |
| Minimum Operating Temperature | -40°C | |
| Maximum Operating Temperature | 150°C | |
| Height | 1.5mm | |
| Width | 3.9 mm | |
| Length | 4.9mm | |
| Standards/Approvals | No | |
| Series | NCV7327 | |
| Automotive Standard | AEC-Q100 | |
| 모두 선택 | ||
|---|---|---|
브랜드 onsemi | ||
Product Type LIN Transceiver | ||
Maximum Data Rate 20kbps | ||
Number of Transceivers 1 | ||
Sub Type LIN Transceiver | ||
Power Down Mode Standby | ||
Supply Current 6.5mA | ||
Mount Type Surface | ||
Interface Type SAE J2602, LIN | ||
Package Type SOIC | ||
Pin Count 8 | ||
Minimum Supply Voltage 5V | ||
Maximum Supply Voltage 18V | ||
ESD Protection Yes | ||
Minimum Operating Temperature -40°C | ||
Maximum Operating Temperature 150°C | ||
Height 1.5mm | ||
Width 3.9 mm | ||
Length 4.9mm | ||
Standards/Approvals No | ||
Series NCV7327 | ||
Automotive Standard AEC-Q100 | ||
The NCV7327 is a fully featured local interconnect network (LIN) transceiver designed to interface between a LIN protocol controller and the physical bus. The LIN bus is designed to communicate low rate data from control devices such as door locks, mirrors, car seats, and sunroofs at the lowest possible cost. The bus is designed to eliminate as much wiring as possible and is implemented using a single wire in each node. Each node has a slave MCU−state machine that recognizes and translates the instructions specific to that function. The main attraction of the LIN bus is that all the functions are not time critical and usually relate to passenger comfort.
관련된 링크들
- onsemi NCV7327D10R2G, LIN Transceiver 20kbps, 8-Pin SOIC
- onsemi NCV7329D10R2G, CAN Transceiver 20kbps LIN, 8-Pin SOIC
- onsemi NCV7356D1R2G, CAN Transceiver 100kbps CAN 2.0, 8-Pin SOIC
- Microchip ATA663454-GDQW, LIN Transceiver 20kbps LIN, 16-Pin VDFN
- Microchip ATA663431-GDQW, LIN Transceiver 20kbps LIN, 16-Pin VDFN
- onsemi NCV7422MW0R2G, LIN Transceiver 0.02Mbps, 14-Pin DFN
- onsemi NCV7422MW0R2G, LIN Transceiver 0.001Mbps, 14-Pin DFN
- onsemi NCV7329MW0R2G, LIN Transceiver 0.001Mbps, 8-Pin DFN
