Microchip MCP2551-E/P, CAN Transceiver 1 Mbps, 8-Pin PDIP

본 이미지는 참조용이오니 재확인이 필요하시면 문의해주세요.

모든 CAN Interface Ics 열람하기
현재 비가용
RS는 이 제품을 더 이상 판매하지 않습니다.
RS 제품 번호:
177-1965
제조사 부품 번호:
MCP2551-E/P
제조업체:
Microchip
제품 정보를 선택해 유사 제품을 찾기
모두 선택

브랜드

Microchip

Maximum Data Rate

1Mbps

Product Type

CAN Transceiver

Number of Transceivers

1

Sub Type

CAN Transceiver

Power Down Mode

High Speed, Standby, Slope Control

Supply Current

75mA

Mount Type

Through Hole

Interface Type

ISO 11898

Package Type

PDIP

Pin Count

8

Minimum Supply Voltage

4.5V

Maximum Supply Voltage

5.5V

ESD Protection

Yes

Minimum Operating Temperature

-40°C

Maximum Operating Temperature

125°C

Length

10.16mm

Series

MCP2551

Standards/Approvals

No

Width

7.11 mm

Height

4.83mm

Automotive Standard

No

COO (Country of Origin):
TH
The MCP2551 is a high-speed CAN transceiver, fault-tolerant device that serves as the interface between a CAN protocol controller and the physical bus. The MCP2551 provides differential transmit and receive capability for the CAN protocol controller and is fully compatible with the ISO-11898 standard, including 24V requirements. It will operate at speeds of up to 1 Mb/s.

Slope control input

Supports 1 Mb/s operation

Suitable for 12V and 24V systems

Externally-controlled slope for reduced RFIemissions

Permanent dominant detect

Low current standby operation

High noise immunity due to differential busimplementation

관련된 링크들