- RS 제품 번호:
- 268-357
- 제조사 부품 번호:
- PTS100/200 BT
- 제조업체:
- Tempo
본 제품은 백오더/선주문 진행으로는 불가한 상황입니다.
죄송합니다만, 본 제품에 대한 재고가 없으며, 현재는 백오더/선주문 진행이 불가합니다.
추가완료!
단가 개당
₩132,320.529
수량 | 한팩당 |
1 + | ₩132,320.529 |
- RS 제품 번호:
- 268-357
- 제조사 부품 번호:
- PTS100/200 BT
- 제조업체:
- Tempo
참조 문서
제정법과 컴플라이언스
해당 안됨
제품 세부 사항
PTS100/200 - Pair Tracing Kit
The PTS Pair Tracing System comprises the PTS 200 Tone Generator and the PTS 100 Probe in a woven polyester carrying pouch. The System is designed to provide an easy to use and cost effective means of tracing wire pairs
Fast, Accurate Wire Identification
Sends Tone to Identify Wires
Polarity Indication
Continuity Test
Adjustable Volume Control
Easy to Operate
2-Line Modular Test Lead
Rugged Industrial design
Water Resistant
Sends Tone to Identify Wires
Polarity Indication
Continuity Test
Adjustable Volume Control
Easy to Operate
2-Line Modular Test Lead
Rugged Industrial design
Water Resistant
Typical Applications:
PTS 200 Tone Generator:
The PTS 200 may be connected via the modular plug or the crocodile clips to the pair under test. Depending on the switch position the Tone Generator will test Polarity continuity or short circuits. The PTS 200 can be used on twisted pair wiring (Telecom, Datacom, security / alarm, audio and electrical), single conductors, coaxial cables, de-energized AC wiring and just about any other wiring you can think of.
PTS 100 Probe:
The PTS 100 Probe has a built-in loudspeaker to make it easy to hear the tracing signals and a near/far sensitivity Adjustment to allow both broad searches and pinpoint identification of wires. To operate just press the button on the top and adjust the sensitivity control to hear the tone generated by the PTS 200
Note
Only for use on non-powered cables, powered by PP3 batteries (not supplied).
Image for illustration purposes only
Image for illustration purposes only
50646842 Cable Tracer is equipped with a BT plug.
사양
속성 | 값 |
---|---|
Tone Frequency | 1200Hz |
Power Source | Battery |
Battery Type | 9V |