Microchip MCP1642B-50I/MS, 1-Channel Boost Regulator, Open Drain, 5.5V, 1.8 V, 175 mA 8-Pin, SOP

본 이미지는 참조용이오니 재확인이 필요하시면 문의해주세요.

대량 구매 할인 기용 가능

Subtotal (1 pack of 10 units)*

₩17,062.50

Add to Basket
수량 선택 또는 입력
재고있음
  • 580 개 단위 배송 준비 완료
더 자세한 내용이 필요하신가요? 필요한 수량을 입력하고 '배송일 확인'을 클릭하면 더 많은 재고 및 배송 세부정보를 확인하실 수 있습니다.

수량
한팩당
한팩당*
10 - 10₩1,706.25₩17,062.50
20 - 40₩1,675.05₩16,750.50
50 - 70₩1,645.80₩16,458.00
80 - 90₩1,614.60₩16,146.00
100 +₩1,587.30₩15,873.00

* 참고 가격: 실제 구매가격과 다를 수 있습니다

RS 제품 번호:
236-8861
제조사 부품 번호:
MCP1642B-50I/MS
제조업체:
Microchip
제품 정보를 선택해 유사 제품을 찾기
모두 선택

브랜드

Microchip

Product Type

Boost Regulator

Maximum Output Voltage

5.5V

Minimum Input Voltage

0.35V

Maximum Input Voltage

5.5V

Minimum Output Current

175mA

Maximum Output Current

800mA

Number of Outputs

1

Topology

Boost

Output Type

Open Drain

Maximum Switching Frequency

1MHz

Minimum Operating Temperature

-40°C

Package Type

SOP

Maximum Operating Temperature

125°C

Pin Count

8

Standards/Approvals

RoHS

Automotive Standard

No

Minimum Output Voltage

1.8V

The Microchip synchronous boost regulator are compact, high-efficiency, fixed-frequency, synchronous step-up DC-DC converters. This family of devices provides an easy-to-use power supply solution for applications powered by either one-cell, two-cell, or three-cell alkaline, Ultimate Lithium, NiCd, NiMH, one-cell Li-Ion or Li-Polymer batteries. Low-voltage technology allows the regulator to start-up without high inrush current or output voltage overshoot from a low voltage input. High efficiency is accomplished by integrating the low-resistance N-Channel Boost switch and synchronous P-Channel switch.

Up to 96% typical efficiency

Low start-up voltage 0.65 V, typical 3.3 V VOUT @ 1 mA

Low operating input voltage 0.35 V, typical 3.3 V VOUT @ 1 mA

Internal synchronous rectifier

Internal compensation

Inrush current limiting and internal soft-start

Shutdown current 1 μA

Over temperature protection

All compensation and protection circuitry are integrated to minimize the number of external components. AnOpen drain power Good output is provided to indicate when the output voltage is within 10% of regulation and facilitates the Interface with an MCU.

관련된 링크들