RS PRO 6 bar Blow Gun, 1/4 in Air Inlet (BSP)

모든 Blow Guns 열람하기
대량 구매 할인 기용 가능

Subtotal (1 unit)*

₩125,307.00

Add to Basket
수량 선택 또는 입력
재고있음
  • 추가로 2026년 4월 20일 부터 5 개 단위 배송
  • 추가로 2026년 7월 10일 부터 32 개 단위 배송
  • 추가로 2026년 10월 02일 부터 16 개 단위 배송
더 자세한 내용이 필요하신가요? 필요한 수량을 입력하고 '배송일 확인'을 클릭하면 더 많은 재고 및 배송 세부정보를 확인하실 수 있습니다.

수량
한팩당
1 - 4₩125,307.00
5 +₩103,135.50

* 참고 가격: 실제 구매가격과 다를 수 있습니다

RS 제품 번호:
806-779
제조업체:
RS PRO
제품 정보를 선택해 유사 제품을 찾기
모두 선택

브랜드

RS PRO

Inlet Size

1/4 in

Product Type

Blow Gun

Operating Pressure

6bar

Nozzle Size

6.35 mm

Material

Aluminium

Standards/Approvals

No

제외

COO (Country of Origin):
NZ

RS PRO Air Blow Gun – 6bar


RS PRO is proud to introduce this superb blow gun, created to extract chips from blind holes with depths of up to 450 mm. This deep-hole vacuum gun features a plastic probe that propels high-pressure air into gaps and holes, effectively dislodging particles. The primary nozzle then securely captures and removes the dislodged particles. Notably, the nozzle is enclosed to prevent any escaped particles, ensuring safety by minimizing the risk of injury.

Features and Benefits


  • Deep hole vacuum gun

  • Special version designed for removing dust, debris and swarf from blind holes up to 18 inches deep

  • Plastic probe jets high-pressure air into the hole to dislodge particles

  • Safely sucked away by the main nozzle

  • Main nozzle shrouded to prevent particles escaping and causing injury

  • 1/4in BSP Inlet

  • Max working pressure 6 bar

  • Accessories available separately

    • Warning

    To avoid risk of injury, these guns must only be used with either the dust bag or conveying hose.
    Always use approved eye protection when using these tools. Blow guns, unless correctly used, can prove dangerous; read instructions carefully.

    Caution

    These non-restricted type blow guns must only used on air lines which have a pressure regulator set at a maximum of 30 psi.

    관련된 링크들