- RS 제품 번호:
- 750-8964
- 제조사 부품 번호:
- UCP206
- 제조업체:
- RS PRO
현재 시스템 에러로 재고 수량 확인이 불가합니다. krenquiry@rs-components.com 에 문의하시거나 잠시후에 다시 시도해주시기 바랍니다.
추가완료!
단가 개당
Was ₩28,926.573
귀하의 지불
₩14,123.481
수량 | 한팩당 |
1 + | ₩14,123.481 |
- RS 제품 번호:
- 750-8964
- 제조사 부품 번호:
- UCP206
- 제조업체:
- RS PRO
제정법과 컴플라이언스
해당 안됨
- COO (Country of Origin):
- CN
제품 세부 사항
RS PRO Pillow Block Bearing 30 mm ID
Pillow blocks are ideal for supporting rotating shaft applications, particularly those with low load-bearing requirements such as electric motors and gearboxes. This model from the quality RS PRO series has an inside diameter of 30 mm. It features a two-bolt set-up that's more robust than a single bolt.
Also known as plummer blocks, pillow blocks are commonly used with conveyor systems, agricultural machinery and packaging applications. Their design keeps friction to a minimum within your costly equipment.
This bearing housing has a pedestal mounting. It's 83 mm high, 38.1 mm deep and 165 mm long. The cast iron material is incredibly hardwearing and resilient, so you can expect a long lifetime.
This product has been exhaustively tested by our engineers for quality and safety as part of our RS PRO range.
Also known as plummer blocks, pillow blocks are commonly used with conveyor systems, agricultural machinery and packaging applications. Their design keeps friction to a minimum within your costly equipment.
This bearing housing has a pedestal mounting. It's 83 mm high, 38.1 mm deep and 165 mm long. The cast iron material is incredibly hardwearing and resilient, so you can expect a long lifetime.
This product has been exhaustively tested by our engineers for quality and safety as part of our RS PRO range.
Features and Benefits
Two-bolt pillow block bearing
Mount hole size of 17 mm
Offers a low-friction solution
Cast iron housing
Overall height of 83 mm
Length of 165 mm
Depth of 38.1 mm
Inside diameter of 30 mm
Mount hole measurement centre-to-centre is 121 mm
Centre height of 42.9 mm
Meets Electrostatic Control Standards ANSI/ESD S20.20:2014 and BS EN 61340-5-1:2007
Mount hole size of 17 mm
Offers a low-friction solution
Cast iron housing
Overall height of 83 mm
Length of 165 mm
Depth of 38.1 mm
Inside diameter of 30 mm
Mount hole measurement centre-to-centre is 121 mm
Centre height of 42.9 mm
Meets Electrostatic Control Standards ANSI/ESD S20.20:2014 and BS EN 61340-5-1:2007
RS PRO
RS PRO is our own brand range and brings you a wide range of high-quality, great value products offering you more choice. Trusted by engineers all over the world, every part of every RS PRO product has been rigorously tested against demanding industry standards
theyre only given the RS PRO Seal of Approval if were confident of their exceptional quality, which means you can be confident too.
사양
속성 | 값 |
---|---|
Inside Diameter | 30mm |
Bearing Unit Type | Pillow Block |
Material | Cast Iron |
Centre Height | 42.9mm |
Mount Hole Size | 17 mm |
Length | 165mm |
Depth | 38.1mm |
Overall Height | 83mm |
Mount Hole Centre-to-Centre | 121mm |