SKF Bearing Heater 20mm To 300mm Bore Size TIH030M/110V
- RS 제품 번호:
- 제조사 부품 번호:
- RS 제품 번호:
- 제조사 부품 번호:
제품 세부 사항
SKF Bearing Induction Heater
Heating bearings has never been so convenient, our SKF bearing heater is lightweight and portable- enabling the user to take it wherever they need. The SKF induction heater is equipped with temperature and time controls, allowing the user to have complete control over the application. The bearing heater uses a special method of heating that is based on high-frequency induction, which in turn provides optimised efficiency. The heater can also be used in other applications and workpieces such as heating ferrous components, gears, pulleys, shrink rings, couplings, and bushings.The SKF induction heater has been designed to carefully and evenly heat bearings, allowing bearings to be installed without the need for specific hand tools and eliminating the need to use force during installation.
Features and Benefits
Power setting options and yokes (X3) mean that smaller bearings can be heated safely, and with a lower power consumption
Equipped with automatic demagnetisation, lowering the risk of ferrous debris contamination after the use of the heater
Capable of heating a 28kg bearing in 20 min
Compact, lightweight design which facilitates portability
The advanced design of the power electronics allows accurate electric current control
Heating time modes
Thermal overheating protection, this protection minimises the damage to the induction coil as well as the electronics - thus for, enhancing the safety and reliability of the induction heater
An integrated carrying handle is built into the bearing heater design
Foldable bearing support arms allows the heater to heat larger bearings and other suitable components
The magnetic temperature probe helps prevent overheating.
The protective, heat resisting gloves provide an extra layer of safety for the person operating the bearing heater
Created and designed with owners and operators in mind, the innovative design provides a considerable advantage
A little more information...
Greased and sealed bearings can be heated with the bearing heater without any risk of damage
There is not a fitted electrical cable plug supplied with the bearing heater
The heater is supplied with heat resistant gloves
Ensure that you select the correct supply voltage for your given application
SKF Bearing Heater, 20 mm to 300 mm Bore Size - TIH030M/110V
This lightweight and powerful bearing heater from SKF expands roller bearings so you can quickly and easily fit them onto a shaft. It's suitable for bore sizes between 20 mm and 300 mm, and its use of high-frequency induction means it can heat a 28 kg bearing in just 20 minutes. Fold-out legs support the component you are heating, while temperature and time controls enhance user safety. You can also use this portable unit to heat other components such as gears or pulleys.
Temperature control range of 0˚ C to +250˚C (can achieve higher temperatures in certain circumstances)
Supply voltage of 110 V
Integrated carrying handle
Three yokes with integrated yoke storage
Supplied with heat-resistant gloves
Overheat protection and automatic demagnetisation
Heating bearings, couplings and other components
How can I use the heater for maximum safety and efficiency?
Position the bearing to be heated over the coil, attach the temperature probe to the inner ring and turn on the heater. Use the included heat-resistant gloves for protection, and be sure to select the appropriate supply voltage for your application.
SKF Electric Induction Heaters and Hot Plates enable bearings and other machinery components to be heated prior to installation. The induction heaters and hot plates are suitable for use with a variety of component sizes (actual sizes accepted depend on which induction heater or hot plate is used) and individual components may be heated to 200/250°C. SKF induction heaters and hot plates are thermostatically-controlled, and for safety reasons, overheat protection is also incorporated into the units to ensure that the induction heater or hot plate is switched off in the event of thermostat failure.
|Maximum Bore Size||300mm|
|Minimum Bore Size||20mm|