Subtotal (1 unit)*
₩90,640.00
재고있음
- 15 개 단위 배송 준비 완료
더 자세한 내용이 필요하신가요? 필요한 수량을 입력하고 '배송일 확인'을 클릭하면 더 많은 재고 및 배송 세부정보를 확인하실 수 있습니다.
수량 | 한팩당 |
|---|---|
| 1 + | ₩90,640.00 |
* 참고 가격: 실제 구매가격과 다를 수 있습니다
- RS 제품 번호:
- 208-0331
- 제조사 부품 번호:
- BA 8
- 제조업체:
- SKF
사양
참조 문서
제정법과 컴플라이언스
제품 세부 사항
제품 정보를 선택해 유사 제품을 찾기
모두 선택 | 제품 정보 | 값 |
|---|---|---|
| 브랜드 | SKF | |
| Inside Diameter | 8mm | |
| Product Type | Ball Bearing | |
| Outside Diameter | 19mm | |
| Race Width | 7mm | |
| Ball Material | Steel | |
| Cage Material | Sheet Metal | |
| End Type | Open | |
| Number of Rows | 1 | |
| Internal Clearance | CN | |
| Static Load Rating | 3.8kN | |
| Dynamic Load Rating | 3.19kN | |
| Bore Type | Parallel | |
| Series | BA | |
| Standards/Approvals | No | |
| Limiting Speed | 17000rpm | |
| Bearing Type | Thrust Ball | |
| 모두 선택 | ||
|---|---|---|
브랜드 SKF | ||
Inside Diameter 8mm | ||
Product Type Ball Bearing | ||
Outside Diameter 19mm | ||
Race Width 7mm | ||
Ball Material Steel | ||
Cage Material Sheet Metal | ||
End Type Open | ||
Number of Rows 1 | ||
Internal Clearance CN | ||
Static Load Rating 3.8kN | ||
Dynamic Load Rating 3.19kN | ||
Bore Type Parallel | ||
Series BA | ||
Standards/Approvals No | ||
Limiting Speed 17000rpm | ||
Bearing Type Thrust Ball | ||
SKF Single-Row Thrust Ball Bearing, 8mm ID, 19mm OD - BA 8
Looking for an innovative solution to withstand the pulling forces on the axes of your applications? This SKF single-row thrust ball bearing accommodates the axial loads of your shafts and rotates with minimal friction to reduce wear. It's designed for very high-speed applications with a rotational speed of up to 17,000rpm (rotations per minute) and can support a heavy static load of up to 3.8kN or a dynamic load of up to 3.19kN.
• Stainless-steel ball and race material makes the bearing robust and resistant to corrosives, meaning it's suitable for use in most indoor and outdoor environments
• Heat stabilised up to +125°C to withstand the heat generated by friction during rotation
Applications
• Consumer goods production
• Transportation and automotive industries
• Power tools
Can I use thrust ball bearings to handle radial loads?
A thrust ball bearing is specifically designed to handle axial loads or horizontal pulling forces that move along the line of a shaft. It won't rotate or absorb friction when exposed to radial loads or vertical pulling forces.
관련된 링크들
- SKF BA 3 1 Row Ball Bearing - 3 mm ID, 8 mm OD
- SKF 619/8-2Z 1 Row Ball Bearing - 8 mm ID, 19 mm OD
- SKF 619/8-2RS1 1 Row Ball Bearing - 8 mm ID, 19 mm OD
- SKF W 619/8-2Z 1 Row Ball Bearing - 8 mm ID, 19 mm OD
- SKF BA 7 1 Row Ball Bearing - 7 mm ID, 17 mm OD
- SKF BA 4 1 Row Ball Bearing - 4 mm ID, 10 mm OD
- SKF BA 5 1 Row Ball Bearing - 5 mm ID, 12 mm OD
- SKF BA 6 1 Row Ball Bearing - 6 mm ID, 14 mm OD