LCBSB-10-01A2-RT, 15.9mm High Nylon PCB Support for 4mm PCB Hole, 17.8 x 17.8mm Base
- RS 제품 번호:
- 721-4708
- 제조사 부품 번호:
- LCBSB-10-01A2-RT
- 제조업체:
- Essentra
1240 <재고있음> 5-9영업일내 홍콩 발송
추가완료!
단가 개당가격(40개가 1팩안에)
₩548.518
| 수량 | 한팩당 | 한팩당* |
| 40 - 360 | ₩548.518 | ₩21,926.929 |
| 400 - 760 | ₩526.095 | ₩21,050.68 |
| 800 - 1960 | ₩510.57 | ₩20,388.318 |
| 2000 + | ₩493.321 | ₩19,732.856 |
| *다른 단위에 대한 가격 표시 | ||
- RS 제품 번호:
- 721-4708
- 제조사 부품 번호:
- LCBSB-10-01A2-RT
- 제조업체:
- Essentra
제정법과 컴플라이언스
- COO (Country of Origin):
- GB
제품 세부 사항
Standard Adhesive Backed Supports
PCB supports moulded in nylon, with an adhesive covered base which is protected by a removable strip until fitting
The board to be supported is retained securely by the locking barb, but may be removed when required
The support can be permanently fixed to most smooth and clean surfaces, due to the good retention properties of the adhesive
As the supports require no fixing screws they are particularly useful where a tapped support pillar cannot be used, e.g. on the rear of front panels
Working temperature range: -20°C to +90°C
Colour is natural
PCB Thickness 1.6mm
Hole dia 4.0mm
The board to be supported is retained securely by the locking barb, but may be removed when required
The support can be permanently fixed to most smooth and clean surfaces, due to the good retention properties of the adhesive
As the supports require no fixing screws they are particularly useful where a tapped support pillar cannot be used, e.g. on the rear of front panels
Working temperature range: -20°C to +90°C
Colour is natural
PCB Thickness 1.6mm
Hole dia 4.0mm
사양
속성 | 값 |
|---|---|
| Overall Height | 26.1mm |
| PCB Support Type | Adhesive-Backed Support |
| Body Height | 15.9mm |
| Support Base Dimensions | 17.8 x 17.8mm |
| PCB Hole Diameter | 4mm |
| PCB Thickness | 1.6mm |
| Material | Nylon |
| Support Base Length | 17.8mm |
| Support Base Width | 17.8mm |