The 4GB version of Raspberry Pi 4 Model B is one of the newest members of the fourth-generation Raspberry Pi family. It is a high-performance general-purpose computer, incorporating a quad-core 64-bit ARM Cortex-A72 CPU. Other key features include: two micro-HDMI ports supporting resolutions up to 4K; USB 3.0; a USB-C connector for power input; true Gigabit Ethernet with PoE capability (requires additional PoE HAT); dual-band wireless networking and Bluetooth 5.0. Together these make this board an ideal fit for your next SBC-based IoT project.

Don’t forget to download the newest version of NOOBS for the Raspberry Pi 4 from the Pi Foundation at https://www.raspberrypi.org/downloads/noobs/

Raspberry Pi 4 Model B board

New Raspberry Pi4 Model

Processor Broadcom BCM2711, quad-core Cortex-A72 (ARM v8) 64-bit SoC @1.5GHz
Memory 4GB
Connectivity 2.4 GHz and 5.0 GHz IEEE 802.11b/g/n/ac wireless LAN, Bluetooth 5.0, BLE. Gigabit Ethernet, 2 x USB 3.0 ports and 2 x USB 2.0 ports
Access Standard 40-pin GPIO (backwards-compatible)
Video and Sound 2 xmirco HDMI ports (up to 4Kp60 supported)2-lane MIPI DSI Display port2-lane MIPI CSI camera port4-pole stereo audio and composite video port
Multimedia H.265 (4Kp60 decode), H.264 (1080p60 decode, 1080p30 encode), OpenGL ES, 3.0 graphics

Raspberry Pi 4 Model B Accessories

Raspberry Pi 3 Model B+

Raspberry Pi 3 Model B+

Processor Broadcom BCM2837B0, Cortex-A53 64-Bit SoC @ 1.4GHz
Memory 1GB LPDDR2 SDRAM
Connectivity 2.4GHz and 5GHz IEEE 802.11.b/g/n/ac wireless LAN, Bluetooth 4.2, BLE Gigabit Ethernet over USB 2.0 (maximum throughput 300Mbps) 4 × USB 2.0 ports
Access Extended 40-pin GPIO header
Video and Sound 1 × full size HDMI MIPI DSI display port MIPI CSI camera port 4 pole stereo output and composite video port
Multimedia H.264, MPEG-4 decode (1080p30); H.264 encode (1080p30); OpenGL ES 1.1, 2.0 graphics

Raspberry Pi 3 Model B+ and Accessories

Setting up your new Raspberry Pi 3 Model B+ is as easy as Pi...

Once you’ve received your new Raspberry Pi it’s easy to connect it up and get started. Watch Pete Wood, from DesignSpark, show you how to connect your board up and start running NOOBS, the new out-of-the-box software from the Raspberry Pi Foundation.