Oscilloscope Probes

An oscilloscope is considered to be the most used instrument for electrical engineers who need to measure electrical characteristics of electronic devices but you also need at least one probe.
Things to consider when choosing probes
• Ensure the probe's input connector matches the connector on your scope
• Choose a probe whose input resistance and capacitance match the input resistance and capacitance of your scope - matching is critical for guaranteeing proper signal transfer and signal accuracy
The best approach, for matching a probe with a scope, is to first choose a probe whose capacitance is within the range of your scope and then fine-tune the probe's capacitance by adjusting its compensation network using the probe's trimmer capacitor.
The 1X probes are suitable for many low frequency applications. They typically offer the same input impedance of the oscilloscope which is normally 1 M Ohm. The most common type of probe with a built in attenuator gives an attenuation of ten, and it is known as a 10X oscilloscope probe
Types of probes
Passive probes are the most commonly used probes for taking measurements. They are easy to use, relatively inexpensive, and fairly rugged. Available in the following configurations:
• 1´: no attenuation
• 10´: factor-of-10 attenuation
• 100´: factor-of-100 attenuation
• 1000´: factor-of-1000 attenuation
Attenuation probes serve to multiply the voltage measurement range of the oscilloscope by using an internal resistor that, when used in conjunction with the input resistance of the scope, creates a voltage divider. Useful for the following reasons:
• It allows for the measurement of a signal that might exceed the limits of the oscilloscope.
• The attenuation circuitry results in higher resistance and lower capacitance, which is important for high-frequency measurements.
Active probes contain active components, such as FETs or amplifiers. Commonly used for taking high-speed measurements (>500 MHz) or on high-impedance circuits. One limitation is their limited voltage range.
Differential probes are popular for measuring high-frequency signals or signals of very low amplitude.
A current probe measures the electrical current flowing through a conductor.
Tips
• Always use an appropriate probe tip and/or probe tip adapter whenever possible
• Keep ground leads short

...
Read more Read less

검색 필터링

총 27개 제품 중 1번째-20번째 제품을 조회 중
한장내 검색 결과 수
제품설명 단가 Probe Type Attenuation Bandwidth Maximum Common Mode Input Voltage Connector Type Model Number p Number of Probes Safety Category Level Safety Category Voltage Series Safety Category Rise Time
RS 제품 번호 146-6618
제조사RS PRO
₩79,380.15
Each
수량
Passive 1:10 300MHz 1.5kV BNC - 1 CAT I, CAT II 300 V, 600 V - CAT I 600 V, CAT II 300 V 1.2ns
RS 제품 번호 146-6624
제조사RS PRO
₩4,657.75
Each
수량
Passive - - - - - - - - - - -
RS 제품 번호 179-9560
제조사RS PRO
₩50,801.25
Each
수량
Passive 10:1 100MHz - BNC - 1 CAT II 400 Vrms RS-TP CAT II 400Vrms <3.5ns
RS 제품 번호 146-6619
제조사RS PRO
₩228,936.55
Each
수량
Miniature 1:10 500MHz 500V BNC - 1 CAT I, CAT II 400 Vrms, 500 Vrms - CAT I 500 Vrms, CAT II 400 Vrms <0.7ns
RS 제품 번호 146-6622
제조사RS PRO
₩69,474.10
Each
수량
Passive 1:100 300MHz 1.5V BNC - 1 CAT I 1500V - CAT I 1500 V 1.2ns
RS 제품 번호 179-9558
제조사RS PRO
₩75,697.35
Each
수량
Passive 10:1 350MHz - BNC - 1 CAT II 400 Vrms RS-TP CAT II 400Vrms <1ns
RS 제품 번호 179-9564
제조사RS PRO
₩66,198.95
Each
수량
Passive 10:1 200MHz - BNC - 1 CAT II 400 Vrms RS-TP CAT II 400Vrms <1.75ns
RS 제품 번호 146-6613
제조사RS PRO
₩31,957.90
Each
수량
Passive 1:10 150MHz 20V BNC - 1 CAT I 600V - CAT I 600 V 2.3ns
RS 제품 번호 179-9562
제조사RS PRO
₩44,181.20
Each
수량
Passive 10:1 100MHz - BNC - 1 CAT II 400 Vrms RS-TP CAT II 400Vrms <3.5ns
RS 제품 번호 123-6479
제조사RS PRO
₩1,133,019.00
Each
수량
Differential, High Voltage 1:50, 1:500 70MHz 1.5kV - - 1 - - - - -
RS 제품 번호 146-6617
제조사RS PRO
₩71,727.80
Each
수량
Passive 1:1, 1:10 20 MHz, 250 MHz 600V BNC - 2 CAT I 600V - CAT I 600 V 1.4 ns, 18 ns
RS 제품 번호 146-6623
제조사RS PRO
₩68,062.05
Each
수량
Passive 1:100 300MHz 700V BNC - 1 CAT I 2500V - CAT I 2500 V 1.2ns
RS 제품 번호 179-9557
제조사RS PRO
₩233,137.05
Each
수량
Passive 10:1 500MHz - BNC - 1 CAT II 400 Vrms RS-TP CAT II 400Vrms <1ns
RS 제품 번호 179-9563
제조사RS PRO
₩71,811.50
Each
수량
Passive 10:1 200MHz - BNC - 1 CAT II 400 Vrms RS-TP CAT II 400Vrms <1.75ns
RS 제품 번호 179-9559
제조사RS PRO
₩54,110.50
Each
수량
Passive 10:1 150MHz - BNC - 1 CAT II 400 Vrms RS-TP CAT II 400Vrms <2.33ns
RS 제품 번호 146-6612
제조사RS PRO
₩28,192.95
Each
수량
Passive 1:1 25MHz 400V BNC - 1 CAT I 400V - CAT I 400 V 14ns
RS 제품 번호 146-6616
제조사RS PRO
₩46,909.20
Each
수량
Passive 1:1, 1:10 20 MHz, 250 MHz 600V BNC - 1 CAT I 600V - CAT I 600 V 1.4 ns, 18 ns
RS 제품 번호 146-6626
제조사RS PRO
₩12,759.60
Each
수량
PC Oscilloscope Probe Kit - - - BNC - - - - - - -
RS 제품 번호 179-9565
제조사RS PRO
₩712,361.40
Each
수량
Active 1:10, 1:100 25MHz 700V BNC - - CAT III - - - 14ns
RS 제품 번호 179-9566
제조사RS PRO
₩2,116,256.85
Each
수량
Differential 1:100, 1:1000 70MHz 5kV BNC - 1 CAT I - - CAT I 5000 Vrms 5ns