SICK SKS/SKM36 Series Measuring Rotary Encoder 12V dc, 128 ppr ppr, Analogue Signal, Solid Type, 6 mm Shaft

모든 Motion Control Sensors 열람하기

Subtotal (1 unit)*

₩772,980.00

Add to Basket
수량 선택 또는 입력
제조사가 재고 비축중
  • 2026년 10월 21일 부터 배송 준비 완료
더 자세한 내용이 필요하신가요? 필요한 수량을 입력하고 '배송일 확인'을 클릭하면 더 많은 재고 및 배송 세부정보를 확인하실 수 있습니다.
수량
한팩당
1 +₩772,980.00

* 참고 가격: 실제 구매가격과 다를 수 있습니다

RS 제품 번호:
267-2068
제조사 부품 번호:
SKM36-HVA0-K02 / 1035601
제조업체:
SICK
제품 정보를 선택해 유사 제품을 찾기
모두 선택

브랜드

SICK

Product Type

Rotary Encoder

Encoder Technology

Measuring

Pulses Per Revolution

128ppr

Series

SKS/SKM36

Maximum Revolutions

4096rpm

Output Signal Type

Analogue

Shaft Type

Solid

Shaft Diameter

6mm

Interface Type

HIPERFACE

Terminal Type

M12 Male Connector

IP Rating

IP50

Maximum Supply Voltage

12V dc

Minimum Operating Temperature

-20°C

Overall Depth

50mm

Overall Height

54mm

Standards/Approvals

CE

Overall Width

40mm

Maximum Operating Temperature

100°C

Mount Type

Flange

COO (Country of Origin):
DE

Overview


The SKS36/SKM36 Encoder is the first of a new generation of optical motor feedback systems. With 128 sine/cosine signals per revolution, this family represents the standard solution among the MFB systems with HIPERFACE®interface. Special feature of this generation: A very small code disk of only 2 mm code track radius allows for holistic scanning. In this, the unavoidable eccentricity errors of the code disk, ball bearing and shaft that occur with conventional systems are compensated for by the system. High angular speeds are no longer limited by the code disk due to the arrangement of the code disk in the middle of the rotary axle.

Absolute position indication with an increment number of 4,096 increments per revolution and a maximum of 4,096 revolutions. Storage of motor-specific data in the electronic type label and the programming are important features of this product family. The motor feedback systems certified to SIL2/PL d meet current requirements with regard to safety technology and make the certification process easier.

At a glance


Motor feedback systems for the standard performance range

128 sine/cosine periods per revolution

Absolute position with a resolution of 4,096 increments per revolution and 4,096 revolutions with the multitier system

Programming of the position value and electronic type label

HIPERFACE®

interface

Integrated version and stand-alone design

Certified according to SIL2/PL d (only valid for SKS36S/SKM36S-H...)

Conforms to RoHs

Your Benefit


The small dimension allows manufacturers of low-power and minimal-power motors to considerably reduce the size of their motors

The stand-alone version is ideally suited as a master and path encoders

The SKS/SKM36 motor feedback systems have strongly penetrated the drive technology market

The consistent mechanical components in SEK/SEL37 allow for a high degree of flexibility with various encoder systems

Applications


Safe motion monitoring of AGV systems and AGCs with one servo drive technology

Motion monitoring via HIPERFACE

관련된 링크들