TDK, SPM, 6530 Shielded Wire-wound SMD Inductor with a Metallic Magnetic Core, 2.2 μH ±20% Wire-Wound 8.4A Idc
- RS 제품 번호:
- 916-4257
- 제조사 부품 번호:
- SPM6530T-2R2M
- 제조업체:
- TDK
1805 <재고있음> 5-9영업일내 홍콩 발송
추가완료!
단가 개당가격(5개가 1팩안에)
₩1,419.593
수량 | 한팩당 | 한팩당* |
5 - 45 | ₩1,419.593 | ₩7,101.413 |
50 - 120 | ₩1,385.095 | ₩6,925.474 |
125 - 245 | ₩1,350.597 | ₩6,752.984 |
250 - 495 | ₩1,316.099 | ₩6,582.218 |
500 + | ₩1,283.326 | ₩6,418.353 |
*다른 단위에 대한 가격 표시 |
- RS 제품 번호:
- 916-4257
- 제조사 부품 번호:
- SPM6530T-2R2M
- 제조업체:
- TDK
참조 문서
제정법과 컴플라이언스
제품 세부 사항
SPM6530 Series Magnetically Shielded Wire Wound Inductors
SPM6530 Series magnetic shield type wound inductor for power circuits use a metallic magnetic material
SPM6530 series structure has an integrated moulded coil, so hum noise is lower than with core adhesive coils
They have a low-profile with maximum heights of 1.2mm and 3.0mm allowing for different usages
Possible to achieve large current, low Rdc, and compactness
Low inductance variance in high-temperature environments with good DC superimposition characteristics"
SPM6530 series structure has an integrated moulded coil, so hum noise is lower than with core adhesive coils
They have a low-profile with maximum heights of 1.2mm and 3.0mm allowing for different usages
Possible to achieve large current, low Rdc, and compactness
Low inductance variance in high-temperature environments with good DC superimposition characteristics"
For products that are Customized and under Non-cancellable & Non-returnable, Sales & Conditions apply.
TDK Non Standard SMT Inductors (Chokes)
사양
속성 | 값 |
---|---|
Inductance | 2.2 μH |
Maximum DC Current | 8.4A |
Package/Case | 6530 |
Length | 7.1mm |
Depth | 6.5mm |
Height | 3mm |
Dimensions | 7.1 x 6.5 x 3mm |
Shielded | Yes |
Tolerance | ±20% |
Maximum DC Resistance | 19mΩ |
Series | SPM |
Core Material | Metallic Magnetic |
Minimum Operating Temperature | -40°C |
Maximum Operating Temperature | +125°C |
Inductor Construction | Wire-Wound |