- RS 제품 번호:
- 790-6693
- 제조업체:
- RS PRO
현재 시스템 에러로 재고 수량 확인이 불가합니다. krenquiry@rs-components.com 에 문의하시거나 잠시후에 다시 시도해주시기 바랍니다.
추가완료!
단가 개당
₩51,113.962
수량 | 한팩당 |
1 - 4 | ₩51,113.962 |
5 + | ₩42,068.586 |
- RS 제품 번호:
- 790-6693
- 제조업체:
- RS PRO
참조 문서
제정법과 컴플라이언스
제품 세부 사항
RS PRO Universal Joint, Single, Plain, Bore 8 mm, 40 mm Length
These universal joints from RS PRO are an ideal choice when you want to connect rotating machinery – such as conveyors, line shafts and drive shafts – to a prime mover. They're used in cars, trucks and other vehicles to connect two shafts or rods whose axes are inclined at an angle to each other.
As a bored hub type, this joint has a round-shaped, hex-shaped or square-shaped hole and a bore of 8 mm. These plain bearing universal couplings are suitable for applications with a maximum speed of 1000 rpm and an operating angle of between 3° and 45°. You can use plain bearings with a protective gaiter to ensure smooth operation when you use this universal joint with machinery or in vehicles.
Common applications for universal joints include automotive propeller shafts, centrifugal pumps and belt conveyors.
As a bored hub type, this joint has a round-shaped, hex-shaped or square-shaped hole and a bore of 8 mm. These plain bearing universal couplings are suitable for applications with a maximum speed of 1000 rpm and an operating angle of between 3° and 45°. You can use plain bearings with a protective gaiter to ensure smooth operation when you use this universal joint with machinery or in vehicles.
Common applications for universal joints include automotive propeller shafts, centrifugal pumps and belt conveyors.
Features and Benefits
• Plain single-joint type
• Made from steel
• Bored hub type
• Maximum speed of 1000 rpm
• Hub outer diameter of 16 mm
• Bore size of 8 mm
• Overall length of 40 mm
• Peak torque of 600 Nm
• Maximum working angle of 45°
• Made from steel
• Bored hub type
• Maximum speed of 1000 rpm
• Hub outer diameter of 16 mm
• Bore size of 8 mm
• Overall length of 40 mm
• Peak torque of 600 Nm
• Maximum working angle of 45°
RS PRO
RS PRO is our own brand range and brings you a wide range of high-quality, great value products offering you more choice. Trusted by engineers all over the world, every part of every RS PRO product has been rigorously tested against demanding industry standards
theyre only given the RS PRO Seal of Approval if were confident of their exceptional quality, which means you can be confident too.
사양
속성 | 값 |
---|---|
Bore | 8mm |
Number of Joints | Single |
Hub Outer Diameter | 16mm |
Overall Length | 40mm |
Joint Type | Plain |
Hub Type | Bored Hub |
Maximum Working Angle | 45° |
Peak Torque | 600Nm |
Material | Steel |
Maximum Speed | 1000rpm |