RS PRO Hybrid, Permanent Magnet Stepper Motor, 0.36Nm Torque, 2.8 V, 1.8°, 42.3 x 42.3mm Frame, 5mm Shaft
- RS 제품 번호:
- 892-8732
- 제조업체:
- RS PRO
일시 품절-다음 입고 날짜는 16/05/2024 (일/월/년) 이며, 그 후 5-10영업일내 홍콩에서 발송. 정확한 입고 수량에 대한 문의는 krenquiry@rs-components.com 로 연락주세요.
단가 개당
Was ₩52,483.532
귀하의 지불
₩25,563.018
수량 | 한팩당 |
1 + | ₩25,563.018 |
대체품
이 제품은 현재 공급 불가입니다. 아래 제품들은 당사에서 추천드리는 대체품입니다.
- RS 제품 번호:
- 892-8732
- 제조업체:
- RS PRO
참조 문서
제정법과 컴플라이언스
- COO (Country of Origin):
- CN
제품 세부 사항
RS PRO Hybrid Stepper Motor 1.8°, 0.36 Nm, 2.8 V, 1.68 A, 4 Wires
Hybrid stepper motors are brushless assembles typically used to divide a full motor rotation into several smaller, equal steps. This delivers greater precision and higher efficiency at lower speeds and lets you make accurate and controlled movements with electric devices. A hybrid stepper uses a combination of permanent magnet and variable reluctance motor technology to make the most of power in small devices.
The motor is RoHS (Restriction of Hazardous Substances) compliant, which means it doesn't contain harmful levels of any hazardous materials. Like all RS PRO products, it's been thoroughly tested to give you confidence in its quality.
Commonly found in lasers, these motors can form part of larger, complex devices such as linear actuators and rotation stages. You'll find them around the home in everything from camera lenses to DVD players.
The motor is RoHS (Restriction of Hazardous Substances) compliant, which means it doesn't contain harmful levels of any hazardous materials. Like all RS PRO products, it's been thoroughly tested to give you confidence in its quality.
Commonly found in lasers, these motors can form part of larger, complex devices such as linear actuators and rotation stages. You'll find them around the home in everything from camera lenses to DVD players.
Features and Benefits
Step angle of 1.8°
Holding torque of 0.36 Nm
Four-wire bipolar winding
Voltage rating of 2.8 V
Frame size of 42.3 x 42.3 mm
Hybrid stepper motor type with permanent magnet
Current rating of 1.68 A
Depth of 62 mm
Resistance per phase of 1.65 Ω
RoHS (Restriction of Hazardous Substances) compliant product
Holding torque of 0.36 Nm
Four-wire bipolar winding
Voltage rating of 2.8 V
Frame size of 42.3 x 42.3 mm
Hybrid stepper motor type with permanent magnet
Current rating of 1.68 A
Depth of 62 mm
Resistance per phase of 1.65 Ω
RoHS (Restriction of Hazardous Substances) compliant product
RS PRO
RS PRO is our own brand range and brings you a wide range of high-quality, great value products offering you more choice. Trusted by engineers all over the world, every part of every RS PRO product has been rigorously tested against demanding industry standards
theyre only given the RS PRO Seal of Approval if were confident of their exceptional quality, which means you can be confident too.
사양
속성 | 값 |
---|---|
Stepper Motor Type | Hybrid, Permanent Magnet |
Step Angle | 1.8° |
Holding Torque | 0.36Nm |
Number Of Wires | 4 |
Supply Voltage | 2.8 V |
Frame Size | 42.3 x 42.3mm |
Shaft Diameter | 5mm |
Current Rating | 1.68 A |
Shaft Length | 22mm |
Depth | 62mm |
Number of Pole Pairs | 1 |
Resistance Per Phase | 1.65Ω |
Standards Met | CE, RoHS Compliant |