- RS 제품 번호:
- 194-7230
- 제조사 부품 번호:
- KSR16-L0-08-10-18-16
- 제조업체:
- INA
일시 품절-다음 입고 날짜는 29/05/2024 (일/월/년) 이며, 그 후 5-10영업일내 홍콩에서 발송. 정확한 입고 수량에 대한 문의는 krenquiry@rs-components.com 로 연락주세요.
추가완료!
단가 개당
₩82,717.58
수량 | 한팩당 |
1 - 4 | ₩82,717.58 |
5 - 9 | ₩79,412.671 |
10 - 24 | ₩77,760.217 |
25 + | ₩76,107.763 |
- RS 제품 번호:
- 194-7230
- 제조사 부품 번호:
- KSR16-L0-08-10-18-16
- 제조업체:
- INA
제정법과 컴플라이언스
제품 세부 사항
INA roller chain idler sprocket units are guidance and return units for roller bush chains and roller chains. They can compensate for chain stretch resulting from operation and give smoother system running under high loads and speeds
The ready-to-fit units comprise sprockets and deep groove ball bearings or radial insert ball bearings. The sprockets are made from high strength steel, sintered iron or plastic (polyamide). Sprockets made from plastic give particularly smooth running and generate very little noise. Since the inner ring of the deep groove ball bearing is extended on both sides, no additional spacer rings are required
In series KSR..-B0, the inner ring is located on the shaft by means of a locking collar. The bearing bore of this series has a plus tolerance.
The ready-to-fit units comprise sprockets and deep groove ball bearings or radial insert ball bearings. The sprockets are made from high strength steel, sintered iron or plastic (polyamide). Sprockets made from plastic give particularly smooth running and generate very little noise. Since the inner ring of the deep groove ball bearing is extended on both sides, no additional spacer rings are required
In series KSR..-B0, the inner ring is located on the shaft by means of a locking collar. The bearing bore of this series has a plus tolerance.
사양
속성 | 값 |
---|---|
Number of Teeth | 18 |
Bore Type | Parallel |
Maximum Bore Diameter | 16.2mm |
Pitch Diameter | 1/2in |
Material | Steel |
Sprocket Width | 18.3mm |