- RS 제품 번호:
- 146-5266
- 제조사 부품 번호:
- ASNU 20
- 제조업체:
- Stieber
일시 품절-다음 입고 날짜는 18/07/2024 (일/월/년) 이며, 그 후 5-10영업일내 홍콩에서 발송. 정확한 입고 수량에 대한 문의는 krenquiry@rs-components.com 로 연락주세요.
추가완료!
단가 개당
₩395,279.809
수량 | 한팩당 |
1 + | ₩395,279.809 |
- RS 제품 번호:
- 146-5266
- 제조사 부품 번호:
- ASNU 20
- 제조업체:
- Stieber
참조 문서
제정법과 컴플라이언스
해당 안됨
제품 세부 사항
Type ASNU is a roller type freewheel non-bearing supported. Bearings are required to support axial and radial loads. Lubrication and sealing must also be provided by the installation. A typical arrangement is to install this type alongside a bearing within the same location tolerances. The inner race is keyed to the shaft. The outer race has positive n6 tolerance, to give a press fit in a H7 housing. Additional side notches in the outer race provide for positive torque transmission. If the housing is to K6 tolerance, use of the notches is not necessary, but the housing must be strong enough to not expand after assembly. This design can accept an axial misalignment of inner and outer race of ± S/2.
사양
속성 | 값 |
---|---|
Inside Diameter | 20mm |
Outside Diameter | 52mm |
Torque | 78Nm |
Race Width | 21mm |
Series | 63 |
Over-running Speed | 2100 (Inner) rpm, 3100 (Outer) rpm |
Keyway | Inner and Outer Race |
Drag Torque | 1.9Ncm |