- RS 제품 번호:
- 382-2055
- 제조사 부품 번호:
- 011-160
- 제조업체:
- Smartscan
현재 시스템 에러로 재고 수량 확인이 불가합니다. krenquiry@rs-components.com 에 문의하시거나 잠시후에 다시 시도해주시기 바랍니다.
추가완료!
단가 개당
₩495,327.459
수량 | 한팩당 |
1 + | ₩495,327.459 |
- RS 제품 번호:
- 382-2055
- 제조사 부품 번호:
- 011-160
- 제조업체:
- Smartscan
제정법과 컴플라이언스
해당 안됨
- COO (Country of Origin):
- GB
제품 세부 사항
Standards
EN61496-1 Type 2, and IEC 61496-2-Type 2 and safety classification EN954-1 Category 3
Warning
These devices must be installed and used in accordance with the installation and operating instructions supplied with each product
Smartscan MFU Type 011160
The MFU Type 011160 from Smartscan offers you a reliable, smart and affordable safety relay. The type 011160 can be used in conjunction with the range of 1000 PLUS series safety light curtains with ease as they are highly compatible with each other.
What are some of the features?
Two dual safety inputs allowing you to connect up to 2 light curtains at any given time.
A dual input is part of the functionality of the 011160, which allows you to connect your emergency stop circuits as part of your relay.
Safety monitoring of the output relays is easily distinguishable as the easy to read LED indicators (see below for differences in indication statuses) allow you to track all the inputs and outputs.
A reset function allowing you to manually override the relay whenever needed.
External Device Monitoring (EDM) allowing you the ease of access to tracking any other devices on your relay
DIN Rail mounting to an enclosure of 70mm
Automatic self-testing will run routines to check its own functionality is working as intended.
Simultaneous monitoring between all related channels in association with the relay
A dual input is part of the functionality of the 011160, which allows you to connect your emergency stop circuits as part of your relay.
Safety monitoring of the output relays is easily distinguishable as the easy to read LED indicators (see below for differences in indication statuses) allow you to track all the inputs and outputs.
A reset function allowing you to manually override the relay whenever needed.
External Device Monitoring (EDM) allowing you the ease of access to tracking any other devices on your relay
DIN Rail mounting to an enclosure of 70mm
Automatic self-testing will run routines to check its own functionality is working as intended.
Simultaneous monitoring between all related channels in association with the relay
Safety indication status:
Inputs Green LED on = Input on
Outputs Green LED on = Output on
Reset Yellow LED on = Reset input on
Reset Yellow LED on (Continuously) = Auto reset mode
EDM Yellow LED on = EDM inputs on
Status Red LEDs on (steady) = System ok
Status Red LEDs on (flashing) = System lockout
Outputs Green LED on = Output on
Reset Yellow LED on = Reset input on
Reset Yellow LED on (Continuously) = Auto reset mode
EDM Yellow LED on = EDM inputs on
Status Red LEDs on (steady) = System ok
Status Red LEDs on (flashing) = System lockout
Safety outputs:
2 x Fail-safe change over contacts, each with a 250V AC, 4A rating
The multifunction safety relay unit 011149 has passed Type Examination from European Notified Body, SAFENET to the Machinery Directive. This type of certification should provide you with the assurance that this safety relay meets all the relevant safety regulations and requirements expected of such a type of product.
사양
속성 | 값 |
---|---|
Supply Voltage | 24V dc |
Number of Channels | 2 |
Safety Contacts | 2 |
Function | Light Beam/Curtain |
Reset Method | Automatic |
Safety Category ISO 13849-1 | 4 |
PL ISO 13849-1 | e |
SIL IEC 61508 | 3 |
Width | 70mm |
Series | MFU |
Depth | 60mm |
Performance Level | e |
Length | 90mm |