XCSM Safety Switch With Rotary Lever Actuator, Metal, NO/2NC

참조 문서
제정법과 컴플라이언스
COO (Country of Origin): ID
제품 세부 사항

XCSM Series, Safety Limit Switches

The Schneider XCSM series of miniature/compact industrial limit switches are designed for monitoring access doors and/or guards on machines with low inertia and also on machines with high inertia, when used in conjunction with actuator operated guard switches. When used on their own they are always installed in ’positive mode’, but if combined in pairs then one switch in ’positive mode’ and the other switch in ’negative mode’. Available with a linear movement (plunger) or rotary movement (lever).

N/C contacts with positive opening operation
Snap action contacts
Miniature/compact red metal housing, pre-cabled
Plastic protective cover, secured by 5-lobe socket head safety screw
Head on the rotary movement switch (lever) is adjustable in 15° steps throughout 360°
Linear movement switch (plunger) has an on-end approach only
IP66/67 protection in accordance with EN/IEC 60529
ROHS compliant


With the appropriate monitoring system and correctly wired these switches can reach safety category 4 conforming to EN/ISO 13849-1, PL e conforming to EN/ISO 13849-1, SIL 3 conforming to EN/IEC 61508.


CSA C22-2 No 14, EN 1088, EN/IEC 60204-1, EN/IEC 60947-5-1, UL 508.



Safety Limit Switch

Actuator Type Rotary Lever
Actuator Included Yes
Normal State Configuration NO/2NC
Action Type Snap
Connection Type Cable
Housing Material Metal
Number of Contacts 3
Pole and Throw Configuration 3P
Series XCSM
Length 94mm
Width 30mm
Mechanical Life Minimum 10000000 cycles
Depth 34mm
Dimensions 94 x 30 x 34 mm
3 <재고있음> 5-9영업일내 홍콩 발송
단가 Each
(exc. VAT)
1 +