Siemens PLC Power Supply 3RX950 Series AS-I Power Supply Unit, 120 V ac, 230 → 500 V ac, 30V dc, 8 A 125 x 120 x

  • RS 제품 번호 746-6081
  • 제조사 부품 번호 3RX9503-0BA00
  • 제조업체 Siemens
참조 문서
제정법과 컴플라이언스
COO (Country of Origin): RO
제품 세부 사항

Siemens Power Supply Module

The Siemens 30Vdc power supply module is designed to use with AS-interface PLCs. The supply line voltage ratings are 120Vac/230Vac and output current is 8A.
Actuator Sensor Interface, AS-I
AS-I is a method of providing communication from simple discrete components such as an inductive sensor or switching valve via a simple two-wire network to a controlling device such as a PLC or PC.
A unique feature of the AS-I system is the flat, two-core cable (stock no 242-6189) designed to enable fast and easy connection, ensuring correct polarity every time. The cable can be used in a network up to 100m (300m if repeaters are used).
By providing power and data down the same cable, the amount of time normally used to connect sensors and actuators is dramatically reduced, thereby providing savings in cable requirements and man-hours.
The choice of AS-I connection modules enables the user to connect standard sensors/actuators to the BUS with all the address benefits of using dedicated sensors/actuators. It also serves to increase the number of I/O nodes that are available to the user by the use of addressable splitter boxes. The connection modules are available in a variety of packages and can accommodate up to 4 inputs and 4 outputs. This enables up to 124 inputs and 124 outputs to be connected to a single AS-I network.
Another feature of the AS-I system is the method by which the sensors or modules communicate with the host. The design of the communications protocol ensures high data accuracy and error detection capabilities, making the ASI system ideal for automation in noisy and industrial environments.
Benefits of AS-I
Replaces hard wiring
High data speed
Low-cost installation
Intelligent diagnostics
Easy to learn and install
Highly flexible
Can connect to other Fieldbus systems
Off-site pre-assembly and test
Easy maintenance
Faster on-site commissioning
Host or stand-alone use
Able to use standard sensors and actuators (using modules)

Features and Benefits

Easy to learn and install
Integrated short circuit protection.
Intelligent diagnostics
Integrated overload detection
Easy maintenance
Faster onsite commissioning
Ambient operating temperature ranges between -10°C 70°C


Industrial automation
Automobile industry


IP20 rated
UL certified
EAC certified

Manufacturer Series 3RX950
For Use With AS-I Power Supply Unit
Line Voltage 120 V ac, 230 → 500 V ac
User Power Output Voltage 30V dc
Output Current 8 A
Length 125mm
Width 120mm
Depth 125mm
Dimensions 125 x 120 x 125 mm
4 <재고있음> 5-9영업일내 홍콩 발송
10 <재고있음> 5-9영업일내 홍콩 발송
단가 Each
(exc. VAT)
1 +