- RS 제품 번호:
- 387-0127
- 제조업체:
- RS PRO
7 <재고있음> 5-9영업일내 홍콩 발송
추가완료!
단가 1세트
Was ₩197,513.124
귀하의 지불
₩112,096.076
Set(s) | Per Set |
1 + | ₩112,096.076 |
- RS 제품 번호:
- 387-0127
- 제조업체:
- RS PRO
참조 문서
제정법과 컴플라이언스
해당 안됨
- COO (Country of Origin):
- CN
제품 세부 사항
Matched Sets
Sets contain matched pairs of parallels
All parallels are hardened and precision ground
Parallelism accuracy 0.0002in
Matched pair accuracy 0.0003in
All parallels are hardened and precision ground
Parallelism accuracy 0.0002in
Matched pair accuracy 0.0003in
Supplied with
Fitted polypropylene storage cases
Parallels, Surface Finish & Hardness
Surface Finish
Any machined component has a surface geometry which consists of three basic elements:
Form or Curvature - Whether the surface has irregular bumps or dimensional changes
Waviness - Whether the surface has regular repetitive ripples or patterns (e.g. milling patterns)
Roughness - The shapes or irregularities that are smaller than, and form part of the waviness pattern (e.g. material micro-structure)
Waviness - Whether the surface has regular repetitive ripples or patterns (e.g. milling patterns)
Roughness - The shapes or irregularities that are smaller than, and form part of the waviness pattern (e.g. material micro-structure)
Waviness and roughness are traditionally the most difficult elements to measure when comparing surface finish, however, they have a radical effect on the performance of the finished component. Variations will cause aesthetic appearance changes, component wear variations, oil retention variation etc. Many manufacturers therefore specify a range of roughness values which their components should be manufactured to, often expressed as: Ra, Rq (RMS), RzDIN, Ry, Sm,mm.
사양
속성 | 값 |
---|---|
Number of Pieces | 8 |
Length | 6in |
Width | 1/2in |
Height | 1 in, 1 1/4 in, 1 1/2 in, 1 3/4in |
Number of Matched Pairs | 4 |
Accuracy | 0.0003 in |