- RS 제품 번호:
- 738-9366
- 제조사 부품 번호:
- ZD1000
- 제조업체:
- Teledyne LeCroy
일시 품절-다음 입고 날짜는 09/09/2024 (일/월/년) 이며, 그 후 5-10영업일내 홍콩에서 발송. 정확한 입고 수량에 대한 문의는 krenquiry@rs-components.com 로 연락주세요.
추가완료!
단가 개당
₩11,601,487.661
수량 | 한팩당 |
1 + | ₩11,601,487.661 |
- RS 제품 번호:
- 738-9366
- 제조사 부품 번호:
- ZD1000
- 제조업체:
- Teledyne LeCroy
제정법과 컴플라이언스
제외
- COO (Country of Origin):
- US
제품 세부 사항
Teledyne LeCroy ZD Series Active Differential Probes
Differential active probes are like two probes in one. Instead of measuring a test point in relation to a ground point (like single-ended active probes) differential probes measure the difference in voltage of a test point in relation to another test point. High bandwidth, excellent common-mode rejection ratio (CMRR) and low noise make LeCroy ZD Series differential probes ideal for applications such as automotive development and failure analysis, together with wireless and data communication design. With its ProBus interface, the ZD Series probe becomes an integral part of the oscilloscope. Probe gain and offset controls are transparent to the user, making it easier to probe the circuit without concern for which gain setting to choose. When used with a LeCroy digital oscilloscope, no external power supply is required. Teledyne LeCroy also offers PK111 ( 7898337 ) which is a replacement accessory kit for ZD500, ZD1000 & ZD1500.
Applications:
CMRR (typical) 80dB @ 60 Hz (ZD200), 60dB @ 50/60 Hz (ZD500, ZD1000, ZD1500)
Supplied with
Adapted probe leads and tips, instruction manual, certificate of calibration
Supplied With:
- Y lead adapter
- 2x solder-in lead
- 2x long spring loaded bendable ground
- 2x tip saver
- swivel tip adapter
- 2x small IC adapter
- 6x micro pogo pin tip
- 2x right angle connector short
- 2x right angle connector long
- 2x micrograbber
- 2x minigrabber
- 2x short spring loaded bendable ground
- probe calibration fixture
- ZD replacement kit instruction manual
- Certificate of calibration
Supplied with
Y lead adapter, 2x solder-in lead, 2x long spring loaded bendable ground, 2x tip saver, swivel tip adapter, 2x small IC adapter, 6x micro pogo pin tip, 2x right angle connector short, 2x right angle connector long, 2x micrograbber, 2x minigrabber, 2x short spring loaded bendable ground, probe calibration fixture, ZD replacement kit instruction manual, certificate of calibration
사양
속성 | 값 |
---|---|
Probe Type | Active, Differential |
Attenuation | 1:1 |
Bandwidth | 1.2GHz |
Maximum Common Mode Input Voltage | 10V |
Model Number p | ZD1000 |
Series | ZD |
Rise Time | 375ps |