Testec SI Series TT-SI 9110 Oscilloscope Probe, Active, Differential Type, 100MHz, 1:100, 1:1000, BNC Connector

RS 제품 번호:: 448-4351
제조사 부품 번호:: 15120
제조업체:: Testec

Testec SI Series TT-SI 9110 Oscilloscope Probe, Active, Differential Type, 100MHz, 1:100, 1:1000, BNC Connector

본 제품군 열람하기

단종

대체품

이 제품은 현재 공급 불가입니다. 아래 제품들은 당사에서 추천드리는 대체품입니다.

Testec 8000 Series TT-SI 8110 Oscilloscope Probe, Active, Differential Type, 100MHz, 1:100 / 1:1000dB, BNC Connector

RS 제품 번호: 238-7387

단가 개당

₩2,512,761.874

RS 제품 번호:: 448-4351
제조사 부품 번호:: 15120
제조업체:: Testec

참조 문서

제정법과 컴플라이언스

해당 안됨

COO (Country of Origin):: TW

제품 세부 사항

Testec oscilloscope probes

The Testec is an active differential oscilloscope probe that enables a conventional oscilloscope to display and measure in-circuit waveforms that are referenced to high common-mode voltages. It is capable of safely measuring differential voltages up to ±1000V AC and 1400VAC/DC. It supports bandwidths up to 100MHz.
Supplied with:
Probe 4 x AA batteries
2 x Grabbers red & black
Instruction manual
Factory calibration certificate

Features and Benefits

Bandwidth is DC to 100MHz
Attenuation is 1:100/1:1000
Rise time is 3.5ns
Differential mode input voltage is 1:100 ±140V (DC + peak AC) or 140Vrms 1:1000 ±1400V (DC + peak AC) or 1000Vrms
Input impedance is 4Mohm ll7pF each side to ground
Common mode voltage range is ±1400V(DC + Peak AC) or 1000Vrms at 1/00 & 1/1000
Non-destructive Max input voltage is 1:100 ±1400V (DC + peak AC) or 1000Vrms 1:1000 ±1400V (DC + peak AC) or 1000Vrms
CMRR (typical) is -80dB at 60Hz and -50dB at 1MHz
Offset (typical) is <±5mV
Noise (typical) is 0.9mVRMS

Applications

Performance conversion
Inverters
Motor speed indicators
Switch mode power supplies

Certifications

CAT III 1000VAC
CAT III 1400V

사양

속성	값
Probe Type	Active, Differential
Attenuation	1:100, 1:1000
Bandwidth	100MHz
Maximum Common Mode Input Voltage	1kV
Connector Type	BNC
Model Number p	TT-SI 9110
Series	SI
Safety Category	CAT III 1000 V, CAT III 1400V
Rise Time	3.5ns